Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Request for Tecno H3 recovery flash files

#1

Hello hovatek my fone was having a privacy protection code (Tecno H3) so I flashed.with sp flash tool and d backup you gave. After flashing it's stuck on d tecno logo. In ur video u said hard reset using volume up and power button then factory reset and 'yes' should make it boot normally. but d tecno h3.doesnt have d yes option just no no no no so please I'm requesting for permission to download custom recovery and flash so I can hard reset it..

[email protected]


Reply
#2
(05-11-2015, 11:17 AM)faabzizy Wrote: Hello hovatek my fone was having a privacy protection code (Tecno H3) so I flashed.with sp flash tool and d backup you gave. After flashing it's stuck on d tecno logo. In ur video u said hard reset using volume up and power button then factory reset and 'yes' should make it boot normally. but d tecno h3.doesnt have d yes option just no no no no  so please I'm requesting for permission to download custom recovery and flash so I can hard reset it..

[email protected]

download this file @ https://hovatek.com/redirect.php?link=ht...t=download and let me know once downloaded
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
Had problems downloading it slow network, but Im done now. what next please
Reply
#4
Hello Hovatek im still waiting for Ur reply on d next instruction
Reply
#5
(05-15-2015, 08:53 AM)faabzizy Wrote: Hello Hovatek im still waiting for Ur reply on d next instruction

Extract the content of the zip file and open the folder
open the CTR_Recovery_H3 by Kepharz folder.
flash that recovery image to your phone using SP flash tool then boot the phone into recovery mode.
let me know if its able to enter recovery mode
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
It was able to boot into recovery after flashing so i followed the instructions u gave to this fellow problem here https://forum.hovatek.com/thread-2815-page-3.html

And after installing the tecno H3 via recovery through zip install its still stucked at tecno logo and makes a kind of noise as if its trying to boot. please what do i do. i have wiped factory settings cache and another DIV cache stuff.
Reply
#7
(05-15-2015, 06:49 PM)faabzizy Wrote: It was able to boot into recovery after flashing so i followed the instructions u gave to this fellow problem here https://forum.hovatek.com/thread-2815-page-3.html

And after installing the tecno H3 via recovery through zip install its still stucked at tecno logo and makes a kind of noise as if its trying to boot. please what do i do. i have wiped factory settings cache and another DIV cache stuff.

in recovery mode > advanced  , format system partition then re-flash the zip file
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
(05-15-2015, 08:10 PM)hovatek Wrote:
(05-15-2015, 06:49 PM)faabzizy Wrote: It was able to boot into recovery after flashing so i followed the instructions u gave to this fellow problem here https://forum.hovatek.com/thread-2815-page-3.html

And after installing the tecno H3 via recovery through zip install its still stucked at tecno logo and makes a kind of noise as if its trying to boot. please what do i do. i have wiped factory settings cache and another DIV cache stuff.

in recovery mode > advanced  , format system partition then re-flash the zip file

It's on now but the Imei shows invalid for both Sims. How do I fix this please.?
Reply
#9
(05-15-2015, 10:55 PM)faabzizy Wrote: It's on now but the Imei shows invalid for both Sims. How do I fix this please.?

restore the NVRAM in that folder using the NVRAM method @ https://forum.hovatek.com/thread-116.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)