Hovatek Forum MOBILE Android [Please help] can not identify (MIRACLE BOX)
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] can not identify (MIRACLE BOX)

[Please help] can not identify (MIRACLE BOX)

Pages (2): 1 2 Next
ham_samm
ham_samm
ham_samm
Senior Member
283
14-04-2020, 04:51 AM
#1



Hi, Good day
I'm trying to back up my (Gionee s10 lite) firmware using miracle box
Everything is set up fine (Qualcomm drivers, putting the phone on EDL and miracle box detecting my phone)
whenever i click on start it says this;

Connecting to Phone, Wait...
  Connect Ok.
  CPUID:0x000560E1
>>can not identify
X3non
X3non
X3non
Recognized Contributor
22,062
14-04-2020, 10:14 AM
#2
(14-04-2020, 04:51 AM)ham_samm Hi, Good day
I'm trying to back up my (Gionee s10 lite) firmware using miracle box
Everything is set up fine (Qualcomm drivers, putting the phone on EDL and miracle box detecting my phone)
whenever i click on start it says this;

Connecting to Phone, Wait...
  Connect Ok.
  CPUID:0x000560E1
>>can not identify

attach a full screenshot of miracle box along with the error message
are you using the firehose programmer file for your exact model?
ham_samm
ham_samm
ham_samm
Senior Member
283
14-04-2020, 01:01 PM
#3
(14-04-2020, 10:14 AM)X3non
(14-04-2020, 04:51 AM)ham_samm Hi, Good day
I'm trying to back up my (Gionee s10 lite) firmware using miracle box
Everything is set up fine (Qualcomm drivers, putting the phone on EDL and miracle box detecting my phone)
whenever i click on start it says this;

Connecting to Phone, Wait...
  Connect Ok.
  CPUID:0x000560E1
>>can not identify

attach a full screenshot of miracle box along with the error message
are you using the firehose programmer file for your exact model?

How do i know the exact firehose programmer file for my exact phone?
Attached is the screenshot of miracle box
Attached Files
.png
miracle box error.PNG
Size: 166.77 KB / Downloads: 23
X3non
X3non
X3non
Recognized Contributor
22,062
14-04-2020, 04:50 PM
#4
(14-04-2020, 01:01 PM)ham_samm How do i know the exact firehose programmer file for my exact phone?
Attached is the screenshot of miracle box

it'll usually be included in stock firmwares (you can download any qfil gionee s10 lite firmware and use firehose file from with) OR randomly try firehose files you can find for the chipset of your device in hopes to find one that works for the device. there's a small list of such @ https://www.hovatek.com/forum/thread-25696.html
ham_samm
ham_samm
ham_samm
Senior Member
283
15-04-2020, 04:02 PM
#5



(14-04-2020, 04:50 PM)X3non
(14-04-2020, 01:01 PM)ham_samm How do i know the exact firehose programmer file for my exact phone?
Attached is the screenshot of miracle box

it'll usually be included in stock firmwares (you can download any qfil gionee s10 lite firmware and use firehose file from with) OR randomly try firehose files you can find for the chipset of your device in hopes to find one that works for the device. there's a small list of such @ https://www.hovatek.com/forum/thread-25696.html

Thanks But non seems to work.
or perhaps i don't know how to fix emmc programmer file on miracle box properly.

According to this https://www.hovatek.com/forum/thread-25473.html, the filehose and programmer are the
same in this case of flashing.
X3non
X3non
X3non
Recognized Contributor
22,062
16-04-2020, 09:32 AM
#6
(15-04-2020, 04:02 PM)ham_samm Thanks But non seems to work.
or perhaps i don't know how to fix emmc programmer  file on miracle box properly.

According to this https://www.hovatek.com/forum/thread-25473.html, the filehose and programmer  are the
same in this case of flashing.

see https://www.hovatek.com/forum/thread-28594.html for how to load firehose file into miracle tool
see https://www.hovatek.com/forum/thread-26213.html fo how to flash a single partition on qlm using miracle
firehose file is the same programmer file
lastly if the files on the list don't work for you, then search online for the firmware of your device model, download and extract it and use the firehose file within

EDIT: turns out you already have a firmware @ https://www.hovatek.com/forum/thread-335...#pid191034 (use the firehose file within that firmware)
This post was last modified: 16-04-2020, 11:53 AM by X3non.
ham_samm
ham_samm
ham_samm
Senior Member
283
16-04-2020, 02:15 PM
#7
(16-04-2020, 09:32 AM)X3non
(15-04-2020, 04:02 PM)ham_samm Thanks But non seems to work.
or perhaps i don't know how to fix emmc programmer  file on miracle box properly.

According to this https://www.hovatek.com/forum/thread-25473.html, the filehose and programmer  are the
same in this case of flashing.

see https://www.hovatek.com/forum/thread-28594.html for how to load firehose file into miracle tool
see https://www.hovatek.com/forum/thread-26213.html fo how to flash a single partition on qlm using miracle
firehose file is the same programmer file
lastly if the files on the list don't work for you, then search online for the firmware of your device model, download and extract it and use the firehose file within

EDIT: turns out you already have a firmware @ https://www.hovatek.com/forum/thread-335...#pid191034 (use the firehose file within that firmware)

Quote:turns out you already have a firmware @ https://www.hovatek.com/forum/thread-335...#pid191034 (use the firehose file within that firmware)
Yes for this, it was one of the first thing i did initially but the chipset of the firmware i downloaded is "prog_emmc_firehose_8917_ddr.mbn" which doesn't match my device chipset which is "8920"
when i tried it, it said wrong model.

JUST TO TEST
I totally understand this phone are totally different.
I tested Gionee S11 lite phone which chipset is "8937" and i notice something, even without unticking the auto option and auto programmer and also wrong FireHose, MIRACLE BOX detected the CPU.Kindly check the image below
https://i.postimg.cc/6QCXDm54/s4.png
but did not work (BootLoad Error, ID: 0003)

Now, i unticked both auto and auto programmer, choose the right FireHose  and programmer for the phone(Gionee S10 lite) from Hovatek and this happened
https://i.postimg.cc/gk4yYS5Q/s3.png

I saw a Gionee programmer file online which has different chipset from mine, i then decided to test it and it passed the loading the boot, wait... part
https://i.postimg.cc/KzZj5s6F/s1.png
This post was last modified: 16-04-2020, 03:25 PM by ham_samm.
X3non
X3non
X3non
Recognized Contributor
22,062
16-04-2020, 08:39 PM
#8
(16-04-2020, 02:15 PM)ham_samm ...https://i.postimg.cc/KzZj5s6F/s1.png

this chipset on your device i.e msm 8920 isn't even supported on miracle thunder 2.82 probably the reason why an older version won't work
try the particular firehose file from this screenshot above i.e s1 using qpst tool readback method @ https://www.hovatek.com/forum/thread-31475.html

if this doesn't work, you can check for gionee s10c, it has same msm8920 chipset. maybe it's firehose might work for your model
ham_samm
ham_samm
ham_samm
Senior Member
283
17-04-2020, 03:14 AM
#9
(16-04-2020, 08:39 PM)X3non
(16-04-2020, 02:15 PM)ham_samm ...https://i.postimg.cc/KzZj5s6F/s1.png

this chipset on your device i.e msm 8920 isn't even supported on miracle thunder 2.82 probably the reason why an older version won't work
try the particular firehose file from this screenshot above i.e s1 using qpst tool readback method @ https://www.hovatek.com/forum/thread-31475.html

if this doesn't work, you can check for gionee s10c, it has same msm8920 chipset. maybe it's firehose might work for your model

Here's my result with QFIL
https://i.postimg.cc/tg1gfxRM/image.png

i'm yet to download s1oc firmware as soon as i'm done, i'll sure give you result on that
ham_samm
ham_samm
ham_samm
Senior Member
283
17-04-2020, 06:15 AM
#10



(16-04-2020, 08:39 PM)X3non
(16-04-2020, 02:15 PM)ham_samm ...https://i.postimg.cc/KzZj5s6F/s1.png

this chipset on your device i.e msm 8920 isn't even supported on miracle thunder 2.82 probably the reason why an older version won't work
try the particular firehose file from this screenshot above i.e s1 using qpst tool readback method @ https://www.hovatek.com/forum/thread-31475.html

if this doesn't work, you can check for gionee s10c, it has same msm8920 chipset. maybe it's firehose might work for your model

I did lil reseach and i saw this
https://i.postimg.cc/1zPQvM4P/image.png

I then tested all 8937, 8917 once again I have on my pc including once from Hovatek, outside Hovatek since there's no harm in trying and they all yield same
https://i.postimg.cc/x8yx1rLF/image.png
This post was last modified: 17-04-2020, 06:18 AM by ham_samm.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram