[pyiphyomgmg]

Hello,

 I have flashed a B310s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :

1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.

4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.


If i reset power form router it starts in emergency mode again with no leds as stated above.

I would really appreicate if anyone with experience or insight to help out.

Regards

[freshtyt]

...

check if the files and procedure @ [ Login / Register to download free] helps you
be sure to watch the video as well and note that i didn't upload any of the files, only found it online