Hovatek Forum HARDWARE SIM / Network unlock Airtel E5573Cs-609 firmware update
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Airtel E5573Cs-609 firmware update

Airtel E5573Cs-609 firmware update

Pages (2): 1 2 Next
asokkhugshal
asokkhugshal
asokkhugshal
Enthusiastic Member
9
27-04-2020, 12:35 PM
#1



First of all I thank you for you enormous support.
I have been using Airtel hotspot device E5573Cs-609 for last 6-7 months. Three four days back I found both light started blinking simultaneously. I searched net and found that I need to update the firmware. I tried to find drivers and firmware but did not succeed. While checking the solution I came to this forum were you mentioned unlocking of this device. I read it and then to download to tools I got registered.
Now I followed the process exactly . I installed Mobile Wifi through Swift iso. Then I did all the steps one by one successfully But when I executed E5573cs_Update_21.318.99.03.00 , It identified the port but at device information it got stuck and popped an error 12- Divice information not found.
Please help me out. Thanks again for your support.
This post was last modified: 27-04-2020, 12:36 PM by asokkhugshal.
X3non
X3non
X3non
Recognized Contributor
22,062
27-04-2020, 04:45 PM
#2
(27-04-2020, 12:35 PM)asokkhugshal First of all I thank you for you enormous support.
I have been using Airtel hotspot device E5573Cs-609 for last 6-7 months. Three four days back I found both light started blinking simultaneously. I searched net and found that I need to update the firmware. I tried to find drivers and firmware but did not succeed. While checking the solution I came to this forum were you mentioned unlocking of this device. I read it and then to download to tools I got registered.
Now I followed the process exactly . I installed Mobile Wifi through Swift iso. Then I did all the steps one by one successfully But when I executed E5573cs_Update_21.318.99.03.00 , It identified the port but at device information it got stuck and popped an error 12- Divice information not found.
Please help me out. Thanks again for your support.

where you able to flash usbloader on this particular device?
asokkhugshal
asokkhugshal
asokkhugshal
Enthusiastic Member
9
27-04-2020, 05:11 PM
#3
(27-04-2020, 04:45 PM)X3non
(27-04-2020, 12:35 PM)asokkhugshal First of all I thank you for you enormous support.
I have been using Airtel hotspot device E5573Cs-609 for last 6-7 months. Three four days back I found both light started blinking simultaneously. I searched net and found that I need to update the firmware. I tried to find drivers and firmware but did not succeed. While checking the solution I came to this forum were you mentioned unlocking of this device. I read it and then to download to tools I got registered.
Now I followed the process exactly . I installed Mobile Wifi through Swift iso. Then I did all the steps one by one successfully But when I executed E5573cs_Update_21.318.99.03.00 , It identified the port but at device information it got stuck and popped an error 12- Divice information not found.
Please help me out. Thanks again for your support.

where you able to flash usbloader on this particular device?
asokkhugshal
asokkhugshal
asokkhugshal
Enthusiastic Member
9
27-04-2020, 05:15 PM
#4
Yes. I executed it successfully. It went up to full bars.
This post was last modified: 27-04-2020, 06:18 PM by asokkhugshal.
Attached Files
.jpg
Picture1.jpg
Size: 396.15 KB / Downloads: 9
.jpg
Picture2.jpg
Size: 145.64 KB / Downloads: 6
.jpg
Picture3.jpg
Size: 183.97 KB / Downloads: 6
X3non
X3non
X3non
Recognized Contributor
22,062
28-04-2020, 11:29 AM
#5



(27-04-2020, 05:15 PM)asokkhugshal Yes. I executed it successfully. It went up to full bars.

skip the E5573cs_Update_21.318.99.03.00 firmware then try flashing the 2nd firmware and webui (in any order) and post the result
asokkhugshal
asokkhugshal
asokkhugshal
Enthusiastic Member
9
28-04-2020, 04:07 PM
#6
(28-04-2020, 11:29 AM)X3non
(27-04-2020, 05:15 PM)asokkhugshal Yes. I executed it successfully. It went up to full bars.

skip the E5573cs_Update_21.318.99.03.00 firmware then try flashing the 2nd firmware and webui (in any order) and post the result
asokkhugshal
asokkhugshal
asokkhugshal
Enthusiastic Member
9
28-04-2020, 04:10 PM
#7
I tried both ways but It is giving Error 12- Get Device information failed after finding the port. I am in doubt if Usbloader.bin file is properly loading or not. It completes the baars but does not give any message.
Also, please let me know after loading this file from balong , should my device light up?
X3non
X3non
X3non
Recognized Contributor
22,062
29-04-2020, 03:00 PM
#8
(28-04-2020, 04:10 PM)asokkhugshal I tried both ways but It is giving Error 12- Get Device information failed after finding the port. I am in doubt if Usbloader.bin file is properly loading or not. It completes the baars but does not give any message.
Also, please let me know after loading this file from balong , should my device light up?

if the progress bar when flashing usbloader takes less than 2 secs then flashing didn't succeed, it should take at least more than 5 secs once the progress bar starts moving to get to completion

secondly, if flashing usbloader succeeds then in device manager, you should see two FC *** serial ports under Ports & LPT and both led lights will blink continuously
asokkhugshal
asokkhugshal
asokkhugshal
Enthusiastic Member
9
30-04-2020, 12:55 PM
#9
No the bar of Belong USB downloader completes very quickly and in the end we have 0000: ED 05 FA 53 C0 *1.USA
X3non
X3non
X3non
Recognized Contributor
22,062
30-04-2020, 06:59 PM
#10



(30-04-2020, 12:55 PM)asokkhugshal No the bar of Belong USB downloader completes very quickly and in the end we have 0000: ED 05 FA 53 C0 *1.USA

your device must have had new firmware version, those that don't support this usbloader
what was the original firmware version of your device?
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram