Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] tecno p5 totally dead

#1

I flashed it with the normal p5 mtkbackup i av been using for other p5. it happened that after flashing was complete, the phone could not boot up again. now it is showing dram problem. i think the phone may be the new tecno p5. can i still try to flash it with the new p5 mtkbackup? if yes, pls grant me permission to download it. [email protected] pls i really need ur assistant on this. thanks.


Reply
#2
(05-13-2015, 07:46 PM)Afiz2010 Wrote: I flashed it with the normal p5 mtkbackup i av been using for other p5. it happened that after flashing was complete, the phone could not boot up again. now it is showing dram problem. i think the phone may be the new tecno p5. can i still try to flash it with the new p5 mtkbackup? if yes, pls grant me permission to download it. [email protected] pls i really need ur assistant on this. thanks.

before you flashed files to the phone, what used to be the color of the first TECNO to appear on boot, white or blue?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
It was blue
Reply
#4
(05-14-2015, 08:41 AM)Afiz2010 Wrote: It was blue

if the TECNO (before you flashed anything) was blue then that means its old OS type. whats the error you're getting in sp flash tool?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
After flashing it. it was now showing a white colour, but still on the tecno logo. i then did the firmware upgrade option on sp flashtool. after the sucessful flashing the phone only vibrates now. if i try to reflash it, it shows brom error
Reply
#6
(This post was last modified: 05-14-2015, 08:18 PM by hovatek. )
(05-14-2015, 07:17 PM)Afiz2010 Wrote: After flashing it. it was now showing a white colour, but still on the tecno logo. i then did the firmware upgrade option on sp flashtool. after the sucessful flashing the phone only vibrates now. if i try to reflash it, it shows brom error
1. whats the error code and the hint at the bottom?
2. granted! download p5 old OS @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
I used d p5 os u sent to me. It is still same error. I asked a repairer nd he confirmed it is the new p5. Maybe the tecno logo is white. I was nt too sure of the blue because It was nt my personal phone . Pls grant me the one for d new p5.
Reply
#8
the error code is brom error. {4032}

Reply
#9
(05-15-2015, 07:34 AM)Afiz2010 Wrote: the error code is brom error. {4032}

granted!
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)