Hovatek Forum MOBILE Android Techno k7 just failed to power on
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Techno k7 just failed to power on

Techno k7 just failed to power on

Pages (2): 1 2 Next
linksboy
linksboy
linksboy
Junior Member
15
16-05-2020, 01:18 AM
#1



Good morning hovered, pls need ur help if tecno k7 displaying this MTK BOOTROM MODE( PRELOADER OFF) on my platform detector, what does it mean and d solution.THANKS



Sent from my HUAWEI CUN-L01 using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,355
16-05-2020, 12:33 PM
#2
(16-05-2020, 01:18 AM)linksboy Good morning hovered, pls need ur help if tecno k7 displaying this MTK BOOTROM MODE( PRELOADER OFF) on my platform detector, what does it mean and d solution.THANKS



Sent from my HUAWEI CUN-L01 using Hovatek Mobile


How did the problem begin?
Did you take note of the phone’s original build no?
Did you try the fix for the error you encountered on sp flash tool @ https://www.hovatek.com/forum/thread-439.html ?
X3non
X3non
X3non
Recognized Contributor
22,062
16-05-2020, 01:34 PM
#3
(16-05-2020, 01:18 AM)linksboy Good morning hovered, pls need ur help if tecno k7 displaying this MTK BOOTROM MODE( PRELOADER OFF) on my platform detector, what does it mean and d solution.THANKS



Sent from my HUAWEI CUN-L01 using Hovatek Mobile

what is wrong with your device and how did the problem begin?
linksboy
linksboy
linksboy
Junior Member
15
17-05-2020, 12:45 AM
#4
The techno k7 was charging when it went off, I try with another fully charged battery but still not power on. Build no is H8019A -N-170907V98.Thanks.

Sent from my HUAWEI CUN-L01 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
18-05-2020, 09:12 AM
#5



(17-05-2020, 12:45 AM)linksboy The techno k7 was charging when it went off, I try with another fully charged battery but still not power on. Build no is H8019A -N-170907V98.Thanks.

Sent from my HUAWEI CUN-L01 using Hovatek Mobile

you have cm2 dongle? if yes
try performing an emmc test check using cm2mtk module and post the result
linksboy
linksboy
linksboy
Junior Member
15
19-05-2020, 08:59 PM
#6
The result is [DA ERROR]: DRAM configure failed! Error Code : 0 *2003 EMICFG NOT FOUND  TRY NOT HOLD VOLUME (+/-) KEYS ON CONNECT! BOOT Error

Sent from my HUAWEI CUN-L01 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
20-05-2020, 12:30 PM
#7
(19-05-2020, 08:59 PM)linksboy The result is [DA ERROR]: DRAM configure failed! Error Code : 0 *2003 EMICFG NOT FOUND  TRY NOT HOLD VOLUME (+/-) KEYS ON CONNECT! BOOT Error

Sent from my HUAWEI CUN-L01 using Hovatek Mobile

attach full screenshot or post the log
linksboy
linksboy
linksboy
Junior Member
15
23-05-2020, 12:18 PM
#8
How to upload d screen shot


Sent from my HUAWEI CUN-L01 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
23-05-2020, 07:10 PM
#9
(23-05-2020, 12:18 PM)linksboy How to upload d screen shot

Sent from my HUAWEI CUN-L01 using Hovatek Mobile

upload to imgur.com then post the link here
linksboy
linksboy
linksboy
Junior Member
15
24-05-2020, 01:56 PM
#10



Ok
Thanks
This post was last modified: 27-05-2020, 02:37 PM by linksboy.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram