Neon Ray V06 SPD 9832e Hung on logo after spd tool readback
Neon Ray V06 SPD 9832e Hung on logo after spd tool readback
(31-05-2020, 08:56 AM)laban kamonya Hi hovatek I had a dead Neon ray which hungs on boot logo. So I had a friend assist me with his similar phone with same build number to back up his and flash it to mine. I did the read back and it went smoothly .in the read flash folder the system IMG and vender was in FLAG extenion ,so I thought the read back was a problem. So I decided to go for the second read back .but before second read back the friends phone powered just well. But on second read back I first got failed error on reading NV ,so in disconnected and untucked NV from read back and connected and the process went on well. After second read back my friends phone powers up but hugs on Boot logo.any help ?
Sent from my TECNO CF7 using Hovatek Mobile
(31-05-2020, 11:04 AM)laban kamonya It can't boot into recovery it just hangs like that forever
Sent from my TECNO CF7 using Hovatek Mobile
(31-05-2020, 04:12 PM)laban kamonya Just to ask how do I flash back the files with FLAG extension for the system and Vender ,do I leave them like or I have to edit back to IMG and if so how do I do it. Thanks in advance.
Sent from my TECNO CF7 using Hovatek Mobile
(01-06-2020, 01:39 PM)laban kamonya The Flag extension file is 1.4GB for the system and 400MB for the vendor.
Sent from my TECNO CF7 using Hovatek Mobile
(04-06-2020, 11:51 AM)laban kamonya It refused ,when flashing back the flag file it gives wrong Bma config error but when i edited the flag to IMG it flashed well but still it hungs on boot logo.
Sent from my TECNO CF7 using Hovatek Mobile