[Please help] Can't flash Tecno CA7 build CA7-H633BCDK-O-180329V139
[Please help] Can't flash Tecno CA7 build CA7-H633BCDK-O-180329V139
(12-06-2020, 04:30 PM)brilliant_smart I have Tecno CA7 with unknown baseband, I tried several times to repair the imei and baseband, I downloaded the DB from here: https://www.hovatek.com/forum/thread-23177.html for the same build number it failed to write with SN_Write_Tool_v2.1504.00. I downloaded the complete firmware it still failed to write.
it said this on the first DA "ERROR: SATATUS_DA_SELECTION_ERR(0xC0030003)"
and this on the second DA I downloaded here "ERROR: STATUS_BROM_CMD_STARTCMD_FAIL(0xC0060001)"
and writing with miracle box stops at:
"Writing(Nand/eMMC)...
preloader Skip.
Writing recovery
Writing md1img
Writing md1dsp
Writing spmfw
Writing sspm_1
Writing sspm_2
Writing lk
Writing lk2
Writing boot
Writing logo
Writing odmdtbo
Writing tee1
Writing tee2
Writing vendor
>>ERROR0_5e"
please help me, I have CA8 that failed to flash too
(13-06-2020, 07:51 AM)hovatek(12-06-2020, 04:30 PM)brilliant_smart I have Tecno CA7 with unknown baseband, I tried several times to repair the imei and baseband, I downloaded the DB from here: https://www.hovatek.com/forum/thread-23177.html for the same build number it failed to write with SN_Write_Tool_v2.1504.00. I downloaded the complete firmware it still failed to write.
it said this on the first DA "ERROR: SATATUS_DA_SELECTION_ERR(0xC0030003)"
and this on the second DA I downloaded here "ERROR: STATUS_BROM_CMD_STARTCMD_FAIL(0xC0060001)"
and writing with miracle box stops at:
"Writing(Nand/eMMC)...
preloader Skip.
Writing recovery
Writing md1img
Writing md1dsp
Writing spmfw
Writing sspm_1
Writing sspm_2
Writing lk
Writing lk2
Writing boot
Writing logo
Writing odmdtbo
Writing tee1
Writing tee2
Writing vendor
>>ERROR0_5e"
please help me, I have CA8 that failed to flash too
You first need to fix Unknown baseband before you can fix null IMEI. This is done by flashing the firmware.
Flash firmware using Software Download tool @ https://www.hovatek.com/forum/thread-23709.html
Once baseband is fixed, fix null IMEI using modem meta @ https://www.hovatek.com/forum/thread-116.html
(14-06-2020, 05:48 PM)brilliant_smart(13-06-2020, 07:51 AM)hovatek(12-06-2020, 04:30 PM)brilliant_smart I have Tecno CA7 with unknown baseband, I tried several times to repair the imei and baseband, I downloaded the DB from here: https://www.hovatek.com/forum/thread-23177.html for the same build number it failed to write with SN_Write_Tool_v2.1504.00. I downloaded the complete firmware it still failed to write.
it said this on the first DA "ERROR: SATATUS_DA_SELECTION_ERR(0xC0030003)"
and this on the second DA I downloaded here "ERROR: STATUS_BROM_CMD_STARTCMD_FAIL(0xC0060001)"
and writing with miracle box stops at:
"Writing(Nand/eMMC)...
preloader Skip.
Writing recovery
Writing md1img
Writing md1dsp
Writing spmfw
Writing sspm_1
Writing sspm_2
Writing lk
Writing lk2
Writing boot
Writing logo
Writing odmdtbo
Writing tee1
Writing tee2
Writing vendor
>>ERROR0_5e"
please help me, I have CA8 that failed to flash too
You first need to fix Unknown baseband before you can fix null IMEI. This is done by flashing the firmware.
Flash firmware using Software Download tool @ https://www.hovatek.com/forum/thread-23709.html
Once baseband is fixed, fix null IMEI using modem meta @ https://www.hovatek.com/forum/thread-116.html
It failed with Software Download tool too, it says "da connection failed! STATUS_BROM_CMD_SEND_DA_FAIL"
It asked for checksum.ini first, I followed hovatek's tutorial, download checksum generator and generated it. After all it failed. I still haven't formatted the phone, it boots..
(14-06-2020, 05:48 PM)brilliant_smart It failed with Software Download tool too, it says "da connection failed! STATUS_BROM_CMD_SEND_DA_FAIL"
It asked for checksum.ini first, I followed hovatek's tutorial, download checksum generator and generated it. After all it failed. I still haven't formatted the phone, it boots..
(15-06-2020, 10:18 AM)X3non(14-06-2020, 05:48 PM)brilliant_smart It failed with Software Download tool too, it says "da connection failed! STATUS_BROM_CMD_SEND_DA_FAIL"
It asked for checksum.ini first, I followed hovatek's tutorial, download checksum generator and generated it. After all it failed. I still haven't formatted the phone, it boots..
ensure that the firmware you're flashing is factory firmware (after loading in SWD, efused should be enabled), if it's not then download @ https://www.hovatek.com/forum/thread-23177.html and also use latest SWD tool tool
if you still encounter any other error message then attach a full screenshot of the tool along with the error message
(15-06-2020, 06:17 PM)brilliant_smart I am using the latest version of software download tool. And I downloaded the firmware from the page you referring, I posted same link on the first post...
(16-06-2020, 12:23 PM)brilliant_smart this is the error photo:
https://ibb.co/xCS1KwZ
(17-06-2020, 12:00 PM)hovatek(16-06-2020, 12:23 PM)brilliant_smart this is the error photo:
https://ibb.co/xCS1KwZ
OK. Efuse is disable
Which DA did you use for the Miracle Box process? Want you try flashing only LK using either miracle or sp tool with DA file