Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

PLZ HELP WITH TECNO M3

#1

i av dis tecon m3 dt stucked in bootlop and i av successful flashed a workin mtk backup of m3 4rm anothr tecno, now d phone is bootin fully bt d problem is evryfin z writin upside down, its write tecno like NOCET, and even d colour change too bt am usin d same mtk backup to flash other m3 & evryfin works 5n


Reply
#2
(06-22-2014, 12:18 PM)jangalusky Wrote: i av dis tecon m3 dt stucked in bootlop and i av successful flashed a workin mtk backup of m3 4rm anothr tecno, now d phone is bootin fully bt d problem is evryfin z writin upside down, its write tecno like NOCET, and even d colour change too bt am usin d same mtk backup to flash other m3 & evryfin works 5n

Do you have clockworkmod installed on this misbehaving M3?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(This post was last modified: 06-22-2014, 02:55 PM by jangalusky. )
(06-22-2014, 12:58 PM)hovatek Wrote:
(06-22-2014, 12:18 PM)jangalusky Wrote: i av dis tecon m3 dt stucked in bootlop and i av successful flashed a workin mtk backup of m3 4rm anothr tecno, now d phone is bootin fully bt d problem is evryfin z writin upside down, its write tecno like NOCET, and even d colour change too bt am usin d same mtk backup to flash other m3 & evryfin works 5n

Do you have clockworkmod installed on this misbehaving M3?

ya, bt it turn upside down & writin backward so it wont knw wen am i backup & restore mode

also i av anoda m3 and if u boot on it wl bring up somfin like
Select Boot Mode
VOLUME_UP to select VOLUME_DOWN is OK
Recovery mode
fastboot mode
normal mode

wil a arrow running up and down & u cnt select anyfin, i use volume dwn and power button to boot and clear emmc stil no hope
i also flashin wt full mtk backup on sp flashtool & i do format whole flash except bootloader 1st b4 flashin other file and then use vol - & power to boot & clear emmc thou its stl showin d same tin, i fink d vol + is pressin itself which boot it in bootloader mode wen u power on bt wen i use vol - + power to boot into fastboot mode both vol are workin
Reply
#4
(This post was last modified: 06-22-2014, 03:15 PM by hovatek. )
(06-22-2014, 02:44 PM)jangalusky Wrote: ya, bt it turn upside down & writin backward so it wont knw wen am i backup & restore mode

also i av anoda m3 and if u boot on it wl bring up somfin like
Select Boot Mode
VOLUME_UP to select VOLUME_DOWN is OK
Recovery mode
fastboot mode
normal mode

wil a arrow running up and down & u cnt select anyfin, i use volume dwn and power button to boot and clear emmc stil no hope
i also flashin wt full mtk backup on sp flashtool & i do format whole flash except bootloader 1st b4 flashin other file and then use vol - & power to boot & clear emmc thou its stl showin d same tin, i fink d vol + is pressin itself which boot it in bootloader mode wen u power on bt wen i use vol - + power to boot into fastboot mode both vol are workin

let's take one m3 @ a time. For the m3 with upside down issue, this sounds like a kernel or build.prop issue. the backup you've used is apparently not compatible with the m3.
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
(06-22-2014, 03:04 PM)hovatek Wrote:
(06-22-2014, 02:44 PM)jangalusky Wrote: ya, bt it turn upside down & writin backward so it wont knw wen am i backup & restore mode

also i av anoda m3 and if u boot on it wl bring up somfin like
Select Boot Mode
VOLUME_UP to select VOLUME_DOWN is OK
Recovery mode
fastboot mode
normal mode

wil a arrow running up and down & u cnt select anyfin, i use volume dwn and power button to boot and clear emmc stil no hope
i also flashin wt full mtk backup on sp flashtool & i do format whole flash except bootloader 1st b4 flashin other file and then use vol - & power to boot & clear emmc thou its stl showin d same tin, i fink d vol + is pressin itself which boot it in bootloader mode wen u power on bt wen i use vol - + power to boot into fastboot mode both vol are workin

let's take one m3 @ a time. For the m3 with upside down issue, this sounds like a kernel or build.prop issue. the backup you've used is apparently not compatible with the m3.

so wat wl u advice mi to do now
Reply
#6
(06-22-2014, 03:35 PM)jangalusky Wrote: so wat wl u advice mi to do now

You'll need to use a different m3 backup. then flash using SP flash tool
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
(06-22-2014, 05:24 PM)hovatek Wrote:
(06-22-2014, 03:35 PM)jangalusky Wrote: so wat wl u advice mi to do now

You'll need to use a different m3 backup. then flash using SP flash tool

ok 10x bt plz i dnt av any other tecno here apart 4rm d other m3, plz cn u assist mi wt it too, so if i successful get it workin, i ll do d backup and use it 2 flash d other one
Reply
#8
(06-22-2014, 09:18 PM)jangalusky Wrote: ok 10x bt plz i dnt av any other tecno here apart 4rm d other m3, plz cn u assist mi wt it too, so if i successful get it workin, i ll do d backup and use it 2 flash d other one

We have all the M3 backup files you'll need but only our premium members are allowed to download for now

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
(06-22-2014, 11:20 PM)hovatek Wrote:
(06-22-2014, 09:18 PM)jangalusky Wrote: ok 10x bt plz i dnt av any other tecno here apart 4rm d other m3, plz cn u assist mi wt it too, so if i successful get it workin, i ll do d backup and use it 2 flash d other one

We have all the M3 backup files you'll need but only our premium members are allowed to download for now

oh, i l8tr figured out dt d problm z 4rm d build.prop wen i boot up d phone & enable debuggin, then run mtkdroidtools & enable rootshell, edit d build.prop & find out dt its writin in RU, plz aw did i change it to english
Reply
#10
(06-23-2014, 12:07 AM)jangalusky Wrote: oh, i l8tr figured out dt d problm z 4rm d build.prop wen i boot up d phone & enable debuggin, then run mtkdroidtools & enable rootshell, edit d build.prop & find out dt its writin in RU, plz aw did i change it to english

You'll need to make a flashable build.prop . As I said earlier, you'll need another working m3 to extract that yourself. We could create a flashable build.prop for you (premium members only) or you can download and flash our Keslar custom ROM for Tecno m3
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)