Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Downloads] Request to download tecno H3 stock rom

#11

help me please


Reply
#12
(05-21-2015, 12:50 PM)bigmilespro Wrote: SP flash tool displays BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
                      [EMI] ENABLE DRAM FAILED

(05-21-2015, 01:47 PM)bigmilespro Wrote: help me please

thats a mismatch error
did you ever flash a ROM to your H3?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#13
not yet...it had the original stock kitkat rom
Reply
#14
(05-21-2015, 03:36 PM)bigmilespro Wrote: not yet...it had the original stock kitkat rom

uninstall and re-install vcom drivers using https://forum.hovatek.com/thread-440.html or try using another PC and sp flash tool v 5
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#15
okay thanks let me try that

Reply
#16
i've tried uninstall and reinstall without success...the problem is still the same...what else can i do????
this is the first time i've ran into that problem cause i've flashed many other tecno mobiles with success...i don't know what's wrong this time...few days ago i flashed tecno D5 and F5 without any problem
Reply
#17
(05-22-2015, 07:31 AM)bigmilespro Wrote: i've tried uninstall and reinstall without success...the problem is still the same...what else can i do????
this is the first time i've ran into that problem cause i've flashed many other tecno mobiles with success...i don't know what's wrong this time...few days ago i flashed tecno D5 and F5 without any problem

download this file @ https://hovatek.com/redirect.php?link=ht...t=download
let me know once downloaded
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#18
i have downloaded the file...how to use it???
Reply
#19
(05-21-2015, 12:50 PM)bigmilespro Wrote: SP flash tool displays BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
                      [EMI] ENABLE DRAM FAILED

Error 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 

Meaning: SP Flash tool is unable to enable DRAM / communicate effectively with the device

Solution: 
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Ensure you tick the boxes for only the files present in the ROM you're about to flash
* Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  https://forum.hovatek.com/thread-440.html
* Delete the sp flash tool folder then re-extract 
* Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing. 
* If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
* Consider using the latest version of Sp Flash tool
* Format the phone before trying to flash the file(s) again
Reply
#20
after that message of DRAM failure,my phone was unable to boot again even into recovery mode
Reply










Users browsing this thread:
1 Guest(s)