Hovatek Forum MOBILE Android I tried flashing my Canon X pro
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


I tried flashing my Canon X pro

I tried flashing my Canon X pro

Rojaab
Rojaab
Rojaab
Enthusiastic Member
5
03-07-2020, 01:22 PM
#1



My Canon X pro started going off  recently so I flashed it. All was fine until it went off completely recently. It only shows the charging light and that's all.
I tried flashing it again but this time with the SP Flash tool but I keep getting the ERROR:STATUS_BROM_CMD_FAIL (0x0060005)
I used several custom DA but the same error shows.
But when I use SDaftersales V4.1811.23.11
I get a different error that says  DA Connection Failed!STATUS_EXT_RAM_EXCEPTION[1/1][100%]
please, I have used up all the custom DA i can find.
I have tried disconnecting and reconnecting the batter too.
Please help me.
BTW:I have also tried downloading the stick Rom another site. All the same.
Help please, I really need this phone.
Rojaab
Rojaab
Rojaab
Enthusiastic Member
5
03-07-2020, 01:25 PM
#2
My Camon X pro started going off  recently so I flashed it. All was fine until it went off completely recently. It only shows the charging light and that's all.
I tried flashing it again but this time with the SP Flash tool but I keep getting the ERROR:STATUS_BROM_CMD_FAIL (0x0060005)
I used several custom DA but the same error shows.
But when I use SDaftersales V4.1811.23.11
I get a different error that says  DA Connection Failed!STATUS_EXT_RAM_EXCEPTION[1/1][100%]
please, I have used up all the custom DA i can find.
I have tried disconnecting and reconnecting the batter too.
Please help me.
BTW:I have also tried downloading the stock Rom from another site. All the same.

Help please, I really need this phone.
This post was last modified: 03-07-2020, 02:41 PM by Rojaab.
X3non
X3non
X3non
Recognized Contributor
22,062
04-07-2020, 10:30 AM
#3
(03-07-2020, 01:22 PM)Rojaab My Canon X pro started going off  recently so I flashed it. All was fine until it went off completely recently. It only shows the charging light and that's all.
I tried flashing it again but this time with the SP Flash tool but I keep getting the ERROR:STATUS_BROM_CMD_FAIL (0x0060005)
I used several custom DA but the same error shows.
But when I use SDaftersales V4.1811.23.11
I get a different error that says  DA Connection Failed!STATUS_EXT_RAM_EXCEPTION[1/1][100%]
please, I have used up all the custom DA i can find.
I have tried disconnecting and reconnecting the batter too.
Please help me.
BTW:I have also tried downloading the stick Rom another site. All the same.
Help please, I really need this phone.

what was the build number of your device before you flashed it?
what's the build number of the firmware you flashed?
was the flashing process successful with a green tick?
and have you tried disconnecting / reconnecting the battery of the device? and it's still dead?
Rojaab
Rojaab
Rojaab
Enthusiastic Member
5
05-07-2020, 11:54 PM
#4
I foolishly failed to get the build number before giving it to my friend to help flash.
After the first flash, it was successful. Like I said it worked for about 2 months then started the same problem again. Only that this time, it goes off does not come on. Only showing the charging light.

May I also add that after it went off totally, it now connects and disconnects repeatedly.
I followed the suggestion I found on another thread to remove the battery and reconnect.
I did and also use another version of Sdwsale software. Now it doesn't disconnect again.

When I try to flash, it requests for auth file.
I got the auth sv5.auth file and now the errors I get is what I post above.

Thanks for responding to my plea.
Bless you sir.
X3non
X3non
X3non
Recognized Contributor
22,062
06-07-2020, 09:08 AM
#5



(05-07-2020, 11:54 PM)Rojaab I foolishly failed to get the build number before giving it to my friend to help flash.
After the first flash, it was successful. Like I said it worked for about 2 months then started the same problem again. Only that this time, it goes off does not come on. Only showing the charging light.

May I also add that after it went off totally, it now connects and disconnects repeatedly.
I followed the suggestion I found on another thread to remove the battery and reconnect.
I did and also use another version of Sdwsale software. Now it doesn't disconnect again.

When I try to flash, it requests for auth file.
I got the auth sv5.auth file and now the errors I get is what I post above.

Thanks for responding to my plea.
Bless you sir.

try flashing other firmware builds @ https://www.hovatek.com/forum/thread-25818.html using swd tool (format all + download)
Rojaab
Rojaab
Rojaab
Enthusiastic Member
5
08-07-2020, 06:34 PM
#6
Thanks, I tried it however it says chip ID mismatch error.
Thanks
Then I realised the link firmwares are for CA8 (Camon X Pro).
But I am trying to Flash CF8 (Camon 11 pro)
Rojaab
Rojaab
Rojaab
Enthusiastic Member
5
08-07-2020, 07:26 PM
#7
(08-07-2020, 06:34 PM)Rojaab Thanks, I tried it however it says chip ID mismatch error.
Thanks
Then I realised the link firmwares are for CA8 (Camon X Pro).
But I am trying to Flash CF8 (Camon 11 pro)

Apologies please I posted the wrong model. My phone is Camon 11 pro
X3non
X3non
X3non
Recognized Contributor
22,062
09-07-2020, 11:14 AM
#8
(08-07-2020, 06:34 PM)Rojaab Thanks, I tried it however it says chip ID mismatch error.
Thanks
Then I realised the link firmwares are for CA8 (Camon X Pro).
But I am trying to Flash CF8 (Camon 11 pro)


cf8 firmware is listed @ https://www.hovatek.com/forum/thread-25855.html
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram