Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

UNBRICK DEAD INFINIX X551 WONT CHARGE OR BOOT

#1

Hi Team,

I am a fan of your blog an a frequent follower. I was requesting for access to the mtk backup for infinix hot note to help me unbrick mine. The phone wont charge nor even boot but I could hear my computer recognise it when I CONNECT IT VIA USB


Reply
#2
(05-20-2015, 07:26 AM)fjunior Wrote: Hi Team,

I am a fan of your blog an a frequent follower. I was requesting for access to the mtk backup for infinix hot note to help me unbrick mine. The phone wont charge nor even boot but I could hear my computer recognise it when I CONNECT IT VIA USB

1, how exactly did this happen?
2. supply a gmail address
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(05-20-2015, 08:12 AM)hovatek Wrote:
(05-20-2015, 07:26 AM)fjunior Wrote: Hi Team,

I am a fan of your blog an a frequent follower. I was requesting for access to the mtk backup for infinix hot note to help me unbrick mine. The phone wont charge nor even boot but I could hear my computer recognise it when I CONNECT IT VIA USB

1, how exactly did this happen?
2. supply a gmail address

I was trying to create a carliv touch recovery using this post https://forum.hovatek.com/thread-1095.html I think I accidentally flashed the original recovery using a wrong scatter file for mtk 6572 it gave a warning of wrong scatter file without any progress when I tried doing the same using the right one the red progress bar could not be shown though I could hear sounds of the phone being recognised wehn I connected the usb cable. upto now its still the same. It wont charge nor power up not even show the boot logo


my email is [email protected]
Reply
#4
(05-20-2015, 12:52 PM)fjunior Wrote: I was trying to create a carliv touch recovery using this post https://forum.hovatek.com/thread-1095.html I think I accidentally flashed the original recovery using a wrong scatter file for mtk 6572 it gave a warning of wrong scatter file without any progress when I tried doing the same using the right one the red progress bar could not be shown though I could hear sounds of the phone being recognised wehn I connected the usb cable. upto now its still the same. It wont charge nor power up not even show the boot logo


my email is [email protected]

granted! download @ https://forum.hovatek.com/thread-533.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
Thanks team let me try to revive it hope it accepts will provide a feedback

Reply
#6
(This post was last modified: 05-22-2015, 05:46 PM by fjunior. )
It still did not go sort me out the phone is still dead this is so frustrating.Is there another way I could use to revive the phone?
Reply
#7
(05-22-2015, 05:45 PM)fjunior Wrote: It still did not go sort me out the phone is still dead this is so frustrating.Is there another way I could use to revive the phone?

which files did you attempt flashing in sp flash tool and was flashing successful?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
none of them flashed the computer just recognises the phone when plugged in but nothing happens after that
Reply
#9
Check the phone drivers on your pc....goto manager by right clicking on "my computer"....dere is probability that you are using the wrong port .....cos somtyms it changes
Reply
#10
Then disconnect d fone usb from the pc.....nd reconnect to know the right drivers.......right click on the suspected driver for the phone ,den click properties ....then u will b able to see d port been use
Reply










Users browsing this thread:
1 Guest(s)