Hovatek Forum MOBILE Android ca8 after flash no power
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


ca8 after flash no power

ca8 after flash no power

danito413
danito413
danito413
Junior Member
18
17-07-2020, 12:12 AM
#1



Hello hovatek tecno ca8 it was misbehaving showing unfortunately error I hard reset it yet not OK then I flashed it and now it do sent power on I have downloaded all your ca8 firmware all to no avail what do I do
X3non
X3non
X3non
Recognized Contributor
22,062
17-07-2020, 09:19 AM
#2
(17-07-2020, 12:12 AM)danito413 Hello hovatek tecno ca8 it was misbehaving showing unfortunately error I hard reset it yet not OK then I flashed it and now it do sent power on I have downloaded all your ca8 firmware all to no avail what do I do

did you take note of the build number of your device before flashing?
was flashing the first firmware successful with a green tick?
danito413
danito413
danito413
Junior Member
18
22-07-2020, 11:32 PM
#3
I did take note of it sir and Here's the build
Ca8-H633EFG-0-180424v150
X3non
X3non
X3non
Recognized Contributor
22,062
23-07-2020, 09:15 AM
#4
(22-07-2020, 11:32 PM)danito413 I did take note of it sir and Here's the build
Ca8-H633EFG-0-180424v150

what's the build number of the firmware you flashed?
was flashing the first firmware that led to the device been totally dead successful with a green tick?
if yes, then have you tried disconnecting / reconnecting the battery of the device?
danito413
danito413
danito413
Junior Member
18
24-07-2020, 11:34 PM
#5



I can't remember cox u have downloaded a lot of firmware but to no avail is there any way out for me
hovatek
hovatek
hovatek
Administrator
49,570
27-07-2020, 04:27 PM
#6
(17-07-2020, 12:12 AM)danito413 Hello hovatek tecno ca8 it was misbehaving showing unfortunately error I hard reset it yet not OK then I flashed it and now it do sent power on I have downloaded all your ca8 firmware all to no avail what do I do

Sounds like an emmc issue.
1. Did you also flash CA8-H633EFG-O-180308V111?
2. Was it Firmware upgrade / Format you used flashing the first time?
3. Do you have CM2 dongle?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
danito413
danito413
danito413
Junior Member
18
28-07-2020, 04:02 AM
#7
I also used this CA8-H633EFG-O-180308V111 but to no avail I used firmware upgrade and format Alla nd download both didnt work out I complain emmc error or sometimes partition ....
X3non
X3non
X3non
Recognized Contributor
22,062
28-07-2020, 09:44 AM
#8
(28-07-2020, 04:02 AM)danito413 I also used this CA8-H633EFG-O-180308V111 but to no avail I used firmware upgrade and format Alla nd download both didnt work out I complain emmc error or sometimes partition ....

if you have a cm2 dongle, then perform an emmc test using the cm2mt* module
danito413
danito413
danito413
Junior Member
18
29-07-2020, 01:44 AM
#9
I don't have sir so in the absent of that no way out?
X3non
X3non
X3non
Recognized Contributor
22,062
30-07-2020, 09:26 AM
#10



(29-07-2020, 01:44 AM)danito413 I don't have sir so in the absent of that no way out?

unless you know a different method of checking / testing emmc, if no then you'll have to take the device to an experienced phone hardware repair technician
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram