Flashing Tecno Spark 5 KD7h fails
Flashing Tecno Spark 5 KD7h fails
(23-07-2020, 07:25 AM)jackie spalo I used these tools :- https://imgur.com/7acBrqm
firmware's used :- https://imgur.com/qa6mPtQ
errors on sp tool :- flashing without custon DA https://imgur.com/uQlxpJ5
Loading the DA https://imgur.com/vUtA061
errors on SWD_AfterSales :- https://imgur.com/Ht4Givx
all firmware's loaded on both sp tool and SWD_AfterSales fails but, SWD_AfterSales flashes some files and fails...
(23-07-2020, 10:27 AM)X3non what's the original build number of the device?
(27-07-2020, 06:25 AM)jackie spalo when flashing with sp-flash tool https://imgur.com/a/mDkOu7K these files :- tkv, dtbo, vbmeta, vbmeta_system, vbmeta_vendor and super needs verified files even if I load the custom DA... And also when a remove vbmeta, vbmeta_system, vbmeta_vendor and super lines on MTK scatter it flashes with SWD and finishes. And the listed files ( vbmeta, vbmeta_system, vbmeta_vendor and super ) are important for device to boot...
(27-07-2020, 12:46 PM)jackie spalo Yes, was unlocked. No, can't boot to recovery ( it is in red state )...
(27-07-2020, 05:42 PM)hovatek Format only seccfg partition using https://www.hovatek.com/forum/thread-21638.html
If successful, see if phone goes beyond red state. You could also try reflash firmware
(28-07-2020, 02:21 PM)jackie spalo Successful formated seccfg, but still in red state. If super ( I guess is system with vendor, it's about 3.02 GB ) and vbmeta could managed to flash 90% rate of booting and I guess the DA file doesn't manage to. If I change the super to system it fails due to large IMG file...
flashed also recovery but doesn't boot to recovery too.
Also I was redirected by someone to use KB7j (spark 3 ) DA file and flashed some denied files ( tkv and odtbo ) ( denied with spark 5 DA ) but still the vbmeta and super files need the verified images...
if there is a 100% workind DA and Auth file, it would work ( suggestions on my side ) .
(29-07-2020, 09:24 AM)X3non you can try using the auth file listed for tecno f2 lte @ https://www.hovatek.com/forum/thread-23243.html along with both da files (one after another), see if you're able to flash super and vbmeta with any of the two combinations