[Rochas]

Good evening everyone. I want to change the password of an ALCATEL Y610D-2AM1 WA3 modem. I reset it with the reset button but I can not connect to the modem because the paper on which there is the default password was taken off and the USB cable connection does not pass. When I connect it by USB cable, files to be installed appear for about 5 seconds and disappear. What to do? Help me. Emei: 357984060862442

[X3non]

Good evening everyone. I want to change the password of an ALCATEL Y610D-2AM1 WA3 modem. I reset it with the reset button but I can not connect to the modem because the paper on which there is the default password was taken off and the USB cable connection does not pass. When I connect it by USB cable, files to be installed appear for about 5 seconds and disappear. What to do? Help me.

you might have installed the files in the past before
is there internet connection on the pc when you connect using usb? then you can try launching the webui page i.e 192.168.*.*

[Rochas]

When I connect the modem to the computer by USB, nothing works. There isn't even a network connection between them.

[X3non]

When I connect the modem to the computer by USB, nothing works. There isn't even a network connection between them.

either retry connecting, and quickly open the setup just before it goes away
OR try using a different pc, hopefully the setup doesn't go away upon connecting the device

[Rochas]

I did it with another PC but it's still such. I was able to copy the files before they disappear but I have never launch that the 'setup' since the 'autorun' file does not signal I'm spelling.

[X3non]

I did it with another PC but it's still such. I was able to copy the files before they disappear but I have never launch that the 'setup' since the 'autorun' file does not signal I'm spelling.

try installing the setup files on any of the PCs, then connect the device
see if that helps to get the mifi connected