Hovatek Forum MOBILE Android tecno spark 5 Air (KD6) problem
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


tecno spark 5 Air (KD6) problem

tecno spark 5 Air (KD6) problem

Pages (2): 1 2 Next
wahby4
wahby4
wahby4
Enthusiastic Member
8
22-08-2020, 08:04 PM
#1



Hello,
I have problem with Tecno spark 5 Air after trying to flashing I got boot problem, the problem in the picture.

I have trying factory firmwares but the Process is Stopped in super.img file.

[Image: 33614985578550366561.jpg]

pls need help

thank you
wahby4
wahby4
wahby4
Enthusiastic Member
8
22-08-2020, 08:05 PM
#2
Firmware before flashing By CM2:

MT6761__10__KD6-H6116GHIL-QGo-OP-200528V252__QP1A.190711.020__kd6_h6116

I have trying these firmwares:

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269
[Hovatek] Tecno Spark 5 Air (KD6-H6116GHIL-QGo-OP-200528V252)

[Image: 51013874320551296305.png]
This post was last modified: 22-08-2020, 08:24 PM by wahby4.
X3non
X3non
X3non
Recognized Contributor
22,062
24-08-2020, 09:10 AM
#3
(22-08-2020, 08:05 PM)wahby4 Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything
wahby4
wahby4
wahby4
Enthusiastic Member
8
24-08-2020, 11:03 AM
#4
(24-08-2020, 09:10 AM)X3non
(22-08-2020, 08:05 PM)wahby4 Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything

Hello,
thank you for reply

i have tested your solutions, with (KD 7 DA File & KC2 DA file & F2 LTE Auth) 

By This versions: 

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269

You can see the problem in screenshots:
[Image: 57150777054754659338.png][Image: 61541433613596234297.png][Image: 33996341681925560487.png]
wahby4
wahby4
wahby4
Enthusiastic Member
8
24-08-2020, 11:23 AM
#5



(24-08-2020, 11:03 AM)wahby4
(24-08-2020, 09:10 AM)X3non
(22-08-2020, 08:05 PM)wahby4 Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything

Hello,
thank you for reply

i have tested your solutions, with (KD 7 DA File & KC2 DA file & F2 LTE Auth) 

By This versions: 

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269

You can see the problem in screenshots:
[Image: 57150777054754659338.png][Image: 61541433613596234297.png][Image: 33996341681925560487.png]

after uncheck vbmeta/vbmeta_system/vbmeta_vendor/super flashing Ok

but still hang on logo

[Image: 67224233410483308735.png]
wahby4
wahby4
wahby4
Enthusiastic Member
8
24-08-2020, 01:29 PM
#6
(24-08-2020, 11:03 AM)wahby4
(24-08-2020, 09:10 AM)X3non
(22-08-2020, 08:05 PM)wahby4 Firmware before flashing By CM2:
...

either try DA file for KD7h or KC2 @ https://www.hovatek.com/forum/thread-23243.html along with the auth file for f2 lte
try flashing the files from the firmware one after the other using either of the two DA, see if you are able to flash anything

Hello,
thank you for reply

i have tested your solutions, with (KD 7 DA File & KC2 DA file & F2 LTE Auth) 

By This versions: 

KD6-H6116GHIL-QGo-OP-200528V252
KD6-H6116GHIL-QGo-OP-200624V269

You can see the problem in screenshots:
[Image: 57150777054754659338.png][Image: 61541433613596234297.png][Image: 33996341681925560487.png]

Problem Fixed 
This post was last modified: 25-08-2020, 06:07 PM by wahby4.
X3non
X3non
X3non
Recognized Contributor
22,062
25-08-2020, 03:07 PM
#7
(24-08-2020, 01:29 PM)wahby4 Problem Fixed with CM2 new Ver 2.15 by 'ultra Flash"
CM2 log:

Thank you very much
...

does this mean that the phone is able to boot successfully after flashing using cm2?
wahby4
wahby4
wahby4
Enthusiastic Member
8
25-08-2020, 03:19 PM
#8
Yes , after flashing with CM2 last ver (Ultra flash) Feature.

Cm2 is flashing VBMETA file successfuly.

Sp flash tool & tecno tool rejected VBmeta file.
This post was last modified: 25-08-2020, 03:20 PM by wahby4.
X3non
X3non
X3non
Recognized Contributor
22,062
25-08-2020, 03:43 PM
#9
(25-08-2020, 03:19 PM)wahby4 Yes , after flashing with CM2 last ver (Ultra flash) Feature.

Cm2 is flashing VBMETA file successfuly.

Sp flash tool & tecno tool rejected VBmeta file.

thanks for confirming this
wahby4
wahby4
wahby4
Enthusiastic Member
8
25-08-2020, 03:44 PM
#10



You are welcome, thank You also
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram