Hovatek Forum MOBILE Android Tecno k8 dead after flashing with file from your site
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno k8 dead after flashing with file from your site

Tecno k8 dead after flashing with file from your site

Pages (3): 1 2 3 Next
Canary
Canary
Canary
Senior Member
173
30-08-2020, 09:19 PM
#1



I have tecno k8 with frp, i flashed with ver
Tecno Spark Pro K8 (K8-H3722ABCDE-N-171229V96) but does not power on it does not flash and asking for Auth file

Sent from my Infinix X603 using Tapatalk
Chijohn
Chijohn
Chijohn
Junior Member
36
30-08-2020, 11:43 PM
#2
I had similar experience.but, in my own case not asking for auth file.I hope you didn't flash the preloader.I had to download from another source to revive the phone.



Use this https://androidhost.ru/4gr if they are the same build.
Canary
Canary
Canary
Senior Member
173
31-08-2020, 12:24 PM
#3
What if i flashed the preloader

Sent from my Infinix X603 using Tapatalk
Chijohn
Chijohn
Chijohn
Junior Member
36
31-08-2020, 07:30 PM
#4
(31-08-2020, 12:24 PM)Canary What if i flashed the  preloader

Sent from my Infinix X603 using Tapatalk
 Anytime  you came accross mtk phones dat hangs on logo or still display logo of the phone always untick the preloader while flashing.except the phone is in dead state. You can try f2 lite auth file for the k8  https://www.hovatek.com/forum/thread-23243.html
X3non
X3non
X3non
Recognized Contributor
22,062
01-09-2020, 09:24 AM
#5



(30-08-2020, 09:19 PM)Canary I have tecno k8 with frp, i flashed with ver
Tecno Spark Pro K8 (K8-H3722ABCDE-N-171229V96) but does not power on it does not flash and asking for Auth file

Sent from my Infinix X603 using Tapatalk

tecno f2 lte auth should work for your device as @Chijohn suggested
but if it doesn't then flash the other firmware build using format all + download in SWD tool @ https://www.hovatek.com/forum/thread-23709.html

BTW so you don't make similar mistake, frp doesn't require flashing full firmware. only format frp partition, refer to https://www.hovatek.com/forum/thread-12794.html
Chijohn
Chijohn
Chijohn
Junior Member
36
02-09-2020, 05:38 AM
#6
(01-09-2020, 09:24 AM)X3non
(30-08-2020, 09:19 PM)Canary I have tecno k8 with frp, i flashed with ver
Tecno Spark Pro K8 (K8-H3722ABCDE-N-171229V96) but does not power on it does not flash and asking for Auth file

Sent from my Infinix X603 using Tapatalk

tecno f2 lte auth should work for your device as @Chijohn suggested
but if it doesn't then flash the other firmware build using format all + download in SWD tool @ https://www.hovatek.com/forum/thread-23709.html

BTW so you don't make similar mistake, frp doesn't require flashing full firmware. only format frp partition, refer to https://www.hovatek.com/forum/thread-12794.html
  Baba, I understand all that.I have so many dongles that take care of frp partition.
This post was last modified: 02-09-2020, 05:39 AM by Chijohn.
Canary
Canary
Canary
Senior Member
173
13-09-2020, 04:01 PM
#7
I flashed with f2 authfile but it still says cpu mismatch

Sent from my Infinix X603 using Hovatek Mobile
Canary
Canary
Canary
Senior Member
173
13-09-2020, 06:52 PM
#8
If i try to flash with miracle it says bad cpu try other boots

Sent from my Infinix X603 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
14-09-2020, 10:02 AM
#9
(13-09-2020, 04:01 PM)Canary I flashed with f2 authfile but it still says cpu mismatch

Sent from my Infinix X603 using Hovatek Mobile

attach a full screenshot of spft along with the error message (shift the error window away from the main window)
Canary
Canary
Canary
Senior Member
173
14-09-2020, 11:42 AM
#10



Miracle box error[Image: 5124df5356d0d67bfce6d7231728d596.jpg]

Sent from my Infinix X603 using Tapatalk
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram