Hovatek Forum HARDWARE SIM / Network unlock How to Repair IMEI Huawei E5377s-32
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


How to Repair IMEI Huawei E5377s-32

How to Repair IMEI Huawei E5377s-32

Pages (3): Previous 1 2 3 Next
Mahnoor
Mahnoor
Mahnoor
Junior Member
18
06-09-2020, 07:43 PM
#11



any help still its not booting dead boot?
Mahnoor
Mahnoor
Mahnoor
Junior Member
18
07-09-2020, 06:23 PM
#12
@admin no reply please i want to back my device is their no body to help?
X3non
X3non
X3non
Recognized Contributor
22,062
07-09-2020, 08:33 PM
#13
(05-09-2020, 04:02 PM)Mahnoor Dear thanks for your help but my device is currently dead not accepting any thing even usbloader i short the boot short but still not accepting i am very thankful to if you make my device to alive again please.


Attaching Screensholt below and tell my now How i can alive my device again...?

you screenshots show the device to be ec5377 not e5377 as posted on this thread and i've been sharing files for e5377
you can check with mkey dongle support (visit their official website) if their tool can fix your device while in qualcomm 9008 mode (edl mode)
Mahnoor
Mahnoor
Mahnoor
Junior Member
18
08-09-2020, 06:47 AM
#14
(07-09-2020, 08:33 PM)X3non
(05-09-2020, 04:02 PM)Mahnoor Dear thanks for your help but my device is currently dead not accepting any thing even usbloader i short the boot short but still not accepting i am very thankful to if you make my device to alive again please.


Attaching Screensholt below and tell my now How i can alive my device again...?

you screenshots show the device to be ec5377 not e5377 as posted on this thread and i've been sharing files for e5377
you can check with mkey dongle support (visit their official website) if their tool can fix your device while in qualcomm 9008 mode (edl mode)


yes E5377 mkey dongle support is i tihnk not supported now this device is completelty dead when attacked to pc it shows only qualcom 9008 mode loader is any way to recover this device or it becomes scrap im very sad because now no way to bring it alive its a piece of scrap and wasted a lot of money :"(
Mahnoor
Mahnoor
Mahnoor
Junior Member
18
09-09-2020, 06:03 AM
#15



their is no usb loader for ec5377 or any method to recover correct?
X3non
X3non
X3non
Recognized Contributor
22,062
09-09-2020, 08:39 PM
#16
(08-09-2020, 06:47 AM)Mahnoor yes E5377 mkey dongle support is i tihnk not supported now this device is completelty dead when attacked to pc it shows only qualcom 9008 mode loader is any way to recover this device or it becomes scrap im very sad because now no way to bring it alive its a piece of scrap and wasted a lot of money :"(

did you verify this directly from mkey support? that the tool can't fix this ec5377 in edl mode?
if mkey doesn't support the device then i'm afraid, unless you can manage to find the right firehose programmer file for this device then the device is as good as gone
Mahnoor
Mahnoor
Mahnoor
Junior Member
18
10-09-2020, 07:10 AM
#17
(09-09-2020, 08:39 PM)X3non
(08-09-2020, 06:47 AM)Mahnoor yes E5377 mkey dongle support is i tihnk not supported now this device is completelty dead when attacked to pc it shows only qualcom 9008 mode loader is any way to recover this device or it becomes scrap im very sad because now no way to bring it alive its a piece of scrap and wasted a lot of money :"(

did you verify this directly from mkey support? that the tool can't fix this ec5377 in edl mode?
if mkey doesn't support the device then i'm afraid, unless you can manage to find the right firehose programmer file for this device then the device is as good as gone


yes this device i dont know hows that .exe destroy its completely and now didn't Recovery available for this device so sad and bad lucky for me?
Mahnoor
Mahnoor
Mahnoor
Junior Member
18
11-09-2020, 06:45 AM
#18
Hello X3non, thanks .exe for dead my device and I search whole Internet there is no solution to repair Huawei EC5377u-872 dead boot repair now this device is just a piece of scrap no ways to turn it or bring it alive :'( sad !!!!!!!!!
X3non
X3non
X3non
Recognized Contributor
22,062
12-09-2020, 05:02 PM
#19
(10-09-2020, 07:10 AM)Mahnoor yes this device i dont know hows that .exe destroy its completely and now didn't Recovery available for this device so sad and bad lucky for me?

from this post @ https://github.com/forth32/qtools/issues/7 ; it is understood that the device runs qlm mdm9625 chipset
the programmer file ENPRG9x25p.bin @ https://github.com/zecke/qtools/tree/master/loaders might work for your device
still you'll need a dump from another ec5377 device to flash
Mahnoor
Mahnoor
Mahnoor
Junior Member
18
14-09-2020, 05:09 PM
#20



(12-09-2020, 05:02 PM)X3non
(10-09-2020, 07:10 AM)Mahnoor yes this device i dont know hows that .exe destroy its completely and now didn't Recovery available for this device so sad and bad lucky for me?

from this post @ https://github.com/forth32/qtools/issues/7 ; it is understood that the device runs qlm mdm9625 chipset
the programmer file ENPRG9x25p.bin @ https://github.com/zecke/qtools/tree/master/loaders might work for your device
still you'll need a dump from another ec5377 device to flash


ALASS!!! Nothing working on this device this device is completely dead and no way to recover this https://prnt.sc/uh4smx



and I want to ask whats wrong in it "E5377_Update_21.296.03.00.00_ADB_TLN_01" that you give its makes my device totally dead and now no body can recover this where asked service center HUAWEI they said sorry.
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram