[Huawei Y5 Prime 2018 DRA-LX2] Trying to get proinfo file
[Huawei Y5 Prime 2018 DRA-LX2] Trying to get proinfo file
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1602675085.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Enter SLA_Challenge!!
Connect BROM failed: STATUS_BROM_CMD_FAIL(-1073348603)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_FAIL (-1073348603) , MSP ERROE CODE : 0x00
(14-10-2020, 12:46 PM)tilt Hi, I'm trying to get the proinfo file of this phone using SP Flash Tool but I'm encountering an error.
This is the last output as soon as I connect the phone to the USB cable while holding down the Volume Down button.
Code:vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1602675085.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Enter SLA_Challenge!!
Connect BROM failed: STATUS_BROM_CMD_FAIL(-1073348603)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_FAIL (-1073348603) , MSP ERROE CODE : 0x00
I'm using SP Flash Tool version 5.1916 on Linux ( Ubuntu 14.04 )
I downloaded the DA + Auth file from here
Am I doing something wrong? My intention is to get access to the proinfo partition.
I'm using this as a reference.
If anyone can guide me , that would be much appreciated.
(18-10-2020, 05:15 AM)hovatek(14-10-2020, 12:46 PM)tilt Hi, I'm trying to get the proinfo file of this phone using SP Flash Tool but I'm encountering an error.
This is the last output as soon as I connect the phone to the USB cable while holding down the Volume Down button.
Code:vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1602675085.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Enter SLA_Challenge!!
Connect BROM failed: STATUS_BROM_CMD_FAIL(-1073348603)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_FAIL (-1073348603) , MSP ERROE CODE : 0x00
I'm using SP Flash Tool version 5.1916 on Linux ( Ubuntu 14.04 )
I downloaded the DA + Auth file from here
Am I doing something wrong? My intention is to get access to the proinfo partition.
I'm using this as a reference.
If anyone can guide me , that would be much appreciated.
Quote:Don't hold any button when connecting
Code:Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
add@/devices/pci0000:00/0000:00:14.0/usb1/1-1
add@/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0
add@/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1
add@/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 2000
device pid = 2000
com portName is: /dev/ttyACM0
Total wait time = -1603112673.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Connect BROM failed: STATUS_BROM_CMD_STARTCMD_FAIL(-1073348607)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (-1073348607) , MSP ERROE CODE : 0x00.
[HINT]:
Please retry the operation:
1.remove battery and usb cable;
2.press download botton on flash tool;
3.pressing download volume down and plug in usb cable and download without battery.)((ConnectBROM,../../../flashtool/Conn/Connection.cpp,100))
Tried that . Now I'm getting this error
Looking at the logs i find this message
Code:10/19/20 18:34:33.461 BROM_DLL[2329][2474]: DEBUG: DA_cmd(): m_p_stopflag(0x02BFFBF8)=0. (da_cmd.cpp:82)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: AUTH_GetInfo(): AUTH_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:323)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: AUTH_HANDLE: customer name = MTK
(flashtool_handle_internal.cpp:7259)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: AUTH_GetInfo(): AUTH_HANDLE->rwlock: READ_UNLOCK. (rwlock.cpp:339)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: SCERT_GetInfo(): SCERT_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:323)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: ERROR: SCERT_GetInfo(): <ERR_CHECKPOINT>[300][error][5007]</ERR_CHECKPOINT> [S_FTHND_FILE_IS_NOT_LOADED_YET] (flashtool_handle.cpp:2441)
I already loaded the Auth file. Am i missing another file?