Hovatek Forum MOBILE Android Issues flashing Pouvoir 4 pro
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Issues flashing Pouvoir 4 pro

Issues flashing Pouvoir 4 pro

debielink
debielink
debielink
Junior Member
27
23-10-2020, 12:02 PM
#1



I needed to restore the stock rom on my Pouvoir 4 pro so I downloaded the firmware LC8-H6215ABCD-Q-GL-200702V290 from this website. Flashing with Transsion software, I encountered an error. This made the phone not to boot again but it is still recognized by both Trassion software and SP Flash Tool. Flashing with SP Flash Tool shows ERROR: STATUS_SEC_IMAGE_TYPE_MISMATCH (verified boot is enabled. Please download signed image tkv-verified.img or disable verified boot.

Now, I cannot disable verified boot as the phone is not even booting.

Please, help me. What can I do at this point.

Thanks in advance
X3non
X3non
X3non
Recognized Contributor
22,062
23-10-2020, 05:58 PM
#2
(23-10-2020, 12:02 PM)debielink ...

you'll need to flash your device using latest cm2 mtk module @ https://www.hovatek.com/forum/thread-21827.html
debielink
debielink
debielink
Junior Member
27
27-10-2020, 02:12 PM
#3
(23-10-2020, 05:58 PM)X3non
(23-10-2020, 12:02 PM)debielink ...

you'll need to flash your device using latest cm2 mtk module @ https://www.hovatek.com/forum/thread-21827.html
Thanks for your reply. Apologies for my late reply. I haven't been online. Kindly confirm if the cm2 mtk module you talked about requires a hardware dongle or I can get a version that has a loader. Thank you
thabitu
thabitu
thabitu
Techie Member
71
27-10-2020, 04:21 PM
#4
(23-10-2020, 12:02 PM)debielink I needed to restore the stock rom on my Pouvoir 4 pro so I downloaded the firmware LC8-H6215ABCD-Q-GL-200702V290 from this website. Flashing with Transsion software, I encountered an error. This made the phone not to boot again but it is still recognized by both Trassion software and SP Flash Tool. Flashing with SP Flash Tool shows ERROR: STATUS_SEC_IMAGE_TYPE_MISMATCH (verified boot is enabled. Please download signed image tkv-verified.img or disable verified boot.

Now, I cannot disable verified boot as the phone is not even booting.

Please, help me. What can I do at this point.

Thanks in advance
Your device is likely hard bricked, if you can open the phone, (screw) disconnect and connect battery, the phone will boot again.
X3non
X3non
X3non
Recognized Contributor
22,062
27-10-2020, 04:43 PM
#5



(27-10-2020, 02:12 PM)debielink Thanks for your reply. Apologies for my late reply. I haven't been online. Kindly confirm if the cm2 mtk module you talked about requires a hardware dongle or I can get a version that has a loader. Thank you

CM2 requires a hardware dongle but you could try using miracle thunder 2.82 @ https://www.hovatek.com/forum/thread-14106.html
ensure to add the DA file into miracle thunder before attempting to flash ; see https://www.hovatek.com/forum/thread-23733.html
you can try either LC7 and LB8 DAs from the list @ https://www.hovatek.com/forum/thread-23243.html ; let me know if any works for you
debielink
debielink
debielink
Junior Member
27
28-10-2020, 01:45 PM
#6
(27-10-2020, 04:43 PM)X3non
(27-10-2020, 02:12 PM)debielink Thanks for your reply. Apologies for my late reply. I haven't been online. Kindly confirm if the cm2 mtk module you talked about requires a hardware dongle or I can get a version that has a loader. Thank you

CM2 requires a hardware dongle but you could try using miracle thunder 2.82 @ https://www.hovatek.com/forum/thread-14106.html
ensure to add the DA file into miracle thunder before attempting to flash ; see https://www.hovatek.com/forum/thread-23733.html
you can try either LC7 and LB8 DAs from the list @ https://www.hovatek.com/forum/thread-23243.html ; let me know if any works for you

Thank you very much. I used the Miracle Thunder 2.82 and I was able to load the LC7 DA file. It was able to load and flash all the partitions EXCEPT the super (system) partition, so i'm still stuck with a bricked phone. Is there anything else you think I can try? Thanks for your help.
X3non
X3non
X3non
Recognized Contributor
22,062
29-10-2020, 12:13 AM
#7
(28-10-2020, 01:45 PM)debielink Thank you very much. I used the Miracle Thunder 2.82 and I was able to load the LC7 DA file. It was able to load and flash all the partitions EXCEPT the super (system) partition, so i'm still stuck with a bricked phone. Is there anything else you think I can try? Thanks for your help.

try using latest cm2 mtk module to flash
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,302
28-03-2021, 03:41 PM
#8
Boot the phone to fastboot and unlock the boot loader and patch ur boot image with another phone but make sure is from ur build number and flash with fastboot
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram