[JordanV-Qc]

This is a follow-up to my previuos problem ;@ https://forum.hovatek.com/thread-37021.html i was asked to create a thread for this other problem after partial fix .

I have tried many way so far ,

first of all there is a big Not Verify , cant detect a sim card .

the nvdata + SP flashtool = need a signed img ; https://ibb.co/JQL1XNy

download of vbmeta vendor & system does nothing .
--
miracle thunder get a write error when i try to flash the full firmware ; https://ibb.co/N1wyFQx.

flashing nvdata does nothing even if it say its done .

fix unknown baseband says its done but does nothing again .
--
theres is no option in connectivity of Engineer mode ; https://ibb.co/cTkbY7s

also have this weird error as available network in wifi https://ibb.co/Df2RZdM

factory reset does nothing , and i cant flash the available update from the wireless update .

[Dogmatize]

also have this weird error as available network in wifi https://ibb.co/Df2RZdM

I have fixed this problem by flash nvram.

[JordanV-Qc]

also have this weird error as available network in wifi https://ibb.co/Df2RZdM

I have fixed this problem by flash nvram.

doesnt work . its like there was a problem with the files . i might be able to get another s88pro firmware by myself tho if everything goes well , my mom got the same phone so ill try to make her understand what to do with me doing the backup via Teamviewer , its a longshot , but i cant reach her physicaly because of Covid restriction .

[Dogmatize]

My hope is in you and Hovatek team, to revive my Doogee S88 pro.

[X3non]

...

to fix baseband, check the firmware you flashed, ensure that it either has secro or md1* and the files flashed successfully
if not then ensure to flash the said files and factory reset in recovery mode

[hovatek]

doesnt work . its like there was a problem with the files .  i might be able to get another s88pro firmware by myself tho if everything goes well , my mom got the same phone so ill try to make her understand what to do with me doing the backup via Teamviewer , its a longshot , but i cant reach her physicaly  because of Covid restriction .

You need to first fix unknown baseband before the rest can be fixed. Do as @x3non said
Leave NVdata out and try flash the rest

[Dogmatize]

@JordanV-Qc
Can you fixed your Phone.

[JordanV-Qc]

https://iandroid.eu/how-to-install-stock...are-guide/

there is an alternative img here , that works .

Edit; this btw fixes almost all my problem exept now im still having a big NOT VERIFY on the screen lol

edit 2 : could not download from my previous link anymore , dunno if its just me but heres the direct link to the img [ Login / Register to download free]

[X3non]

...Edit; this btw fixes almost all my problem exept now im still having a big NOT VERIFY on the screen lol

untested: you can try using "MagiskHide Props Config" module to add the custom prop @ https://forum.hovatek.com/thread-32480-p...#pid187751
if it works, it'll only be a temp. fix

alternatively, contact doogee support, they should have a custom sn writer tool to enable you write back the original tee key of your device

[JordanV-Qc]

...Edit; this btw fixes almost all my problem exept now im still having a big NOT VERIFY on the screen lol

untested: you can try using "MagiskHide Props Config" module to add the custom prop @ https://forum.hovatek.com/thread-32480-p...#pid187751
if it works, it'll only be a temp. fix

alternatively, contact doogee support, they should have a custom sn writer tool to enable you write back the original tee key of your device

well , im thinking the files might already be in the img , im just not sure wich one correspond to the md1_db and ap_db , iv tried those i thought and keep getting mismatch error