Hovatek Forum MOBILE Android Auth file for tecno pop 2 plus
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Auth file for tecno pop 2 plus

Auth file for tecno pop 2 plus

KyuubiKeith
KyuubiKeith
KyuubiKeith
Newbie
4
06-11-2020, 11:50 AM
#1



Hello, I am having some difficulty flashing the stock from on my tecno pop plus 2 as the sp flash tool keeps asking for an auth file...the actual error reads that THE_S_AUTH_HANDLE_IS_NOT_READY(5000) and that it is a secure base band chip requiring an auth file. I have been unsuccessful in getting access to that file. I request assistance in getting it so that I know if it will help fix my problems.

I have also tried flashing with the aftersales tool but it does not help...my problem was that I flashed the wrong from and preloader so the aftersales tool keeps giving me a software mismatch error
This post was last modified: 06-11-2020, 12:07 PM by KyuubiKeith.
Attached Files
.png
Screenshot (22).png
Size: 137.53 KB / Downloads: 11
X3non
X3non
X3non
Recognized Contributor
22,062
06-11-2020, 07:57 PM
#2
(06-11-2020, 11:50 AM)KyuubiKeith Hello, I am having some difficulty flashing the stock from on my tecno pop plus 2 as the sp flash tool keeps asking for an auth file...the actual error reads that THE_S_AUTH_HANDLE_IS_NOT_READY(5000) and that it is a secure base band chip requiring an auth file. I have been unsuccessful in getting access to that file. I request assistance in getting it so that I know if it will help fix my problems.

I have also tried flashing with the aftersales tool but it does not help...my problem was that I flashed the wrong from and preloader so the aftersales tool keeps giving me a software mismatch error

did you try flashing using format all + download in swd tool? attach a full screenshot of the error message
KyuubiKeith
KyuubiKeith
KyuubiKeith
Newbie
4
06-11-2020, 10:46 PM
#3
(06-11-2020, 07:57 PM)X3non
(06-11-2020, 11:50 AM)KyuubiKeith Hello, I am having some difficulty flashing the stock from on my tecno pop plus 2 as the sp flash tool keeps asking for an auth file...the actual error reads that THE_S_AUTH_HANDLE_IS_NOT_READY(5000) and that it is a secure base band chip requiring an auth file. I have been unsuccessful in getting access to that file. I request assistance in getting it so that I know if it will help fix my problems.

I have also tried flashing with the aftersales tool but it does not help...my problem was that I flashed the wrong from and preloader so the aftersales tool keeps giving me a software mismatch error

did you try flashing using format all + download in swd tool? attach a full screenshot of the error message

I did...that's where it was giving me the software mismatch error....
Attached Files
.png
Screenshot (23).png
Size: 64.67 KB / Downloads: 19
.png
Screenshot (24).png
Size: 62.62 KB / Downloads: 11
.png
Screenshot (25).png
Size: 59.04 KB / Downloads: 9
X3non
X3non
X3non
Recognized Contributor
22,062
07-11-2020, 07:35 PM
#4
(06-11-2020, 10:46 PM)KyuubiKeith I did...that's where it was giving me the software mismatch error....

try this
edit the file commonsettings.ini within the config directory of SWD tool
change the value of "CheckVersion" from 1 to 0
save and restart the tool then retry flashing

OR better still you could try using auth file for f2 lte @ https://www.hovatek.com/forum/thread-23243.html
KyuubiKeith
KyuubiKeith
KyuubiKeith
Newbie
4
08-11-2020, 11:03 AM
#5



(07-11-2020, 07:35 PM)X3non
(06-11-2020, 10:46 PM)KyuubiKeith I did...that's where it was giving me the software mismatch error....

try this
edit the file commonsettings.ini within the config directory of SWD tool
change the value of "CheckVersion" from 1 to 0
save and restart the tool then retry flashing

OR better still you could try using auth file for f2 lte @ https://www.hovatek.com/forum/thread-23243.html

thank you so much...after editing the checkversion.ini file...I was able to format all and download and flash the room to my phone....thanks again
KyuubiKeith
KyuubiKeith
KyuubiKeith
Newbie
4
08-11-2020, 11:53 AM
#6
(08-11-2020, 11:03 AM)KyuubiKeith
(07-11-2020, 07:35 PM)X3non
(06-11-2020, 10:46 PM)KyuubiKeith I did...that's where it was giving me the software mismatch error....

try this
edit the file commonsettings.ini within the config directory of SWD tool
change the value of "CheckVersion" from 1 to 0
save and restart the tool then retry flashing

OR better still you could try using auth file for f2 lte @ https://www.hovatek.com/forum/thread-23243.html

thank you so much...after editing the checkversion.ini file...I was able to format all and download and flash the room to my phone....thanks again

now I can actually ask if there exists a custom recovery for the same...like a ported unofficial twrp....
X3non
X3non
X3non
Recognized Contributor
22,062
09-11-2020, 11:19 AM
#7
(08-11-2020, 11:53 AM)KyuubiKeith now I can actually ask if there exists a custom recovery for the same...like a ported unofficial twrp....

this should be posted in a new thread
you can try the tool @ https://www.hovatek.com/forum/thread-21839.html
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram