Hello There, Guest! Login Register

Free Hovatek T-shirts! We would like to know your size...see our blog post (March 26, 2017)



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tecno m3
#1

please i am in need of tecno m3 flash file i have m3 that when i try to power, it will only show ;select boot mode ;and it wii not allow me to select from the options

Reply
#2
(This post was last modified:07-20-2014, 03:36 PM by hovatek. )
(07-05-2014, 12:28 PM)fmano Wrote: please i am in need of tecno m3 flash file i have m3 that when i try to power, it will only show ;select boot mode ;and it wii not allow me to select from the options
If i get you right, whenever you boot your Tecno m3, it shows a menu with cursor scrolling fast so you can't select any item.
1. Your volume down button might be faulty. Hold down both volume buttons before booting your phone and see what happens.
2. If 1 doesn't work then You need to flash a new Stock ROM. here's what you'll need:

PC
SP Flash tool
PdaNet
USB cord
Tecno M3 stock rom backup
preloader.bin
scatter file
uboot, secro, logo, mbr and ebr

Which of the above items dont you have?
Reply
#3
(07-05-2014, 01:16 PM)hovatek Wrote:
(07-05-2014, 12:28 PM)fmano Wrote: please i am in need of tecno m3 flash file i have m3 that when i try to power, it will only show ;select boot mode ;and it wii not allow me to select from the options

OK. You need to flash a new Stock ROM. here's what you'll need:

PC
SP Flash tool
PdaNet
USB cord
Tecno M3 stock rom backup
preloader.bin
scatter file
uboot, secro, logo, mbr and ebr

Which of the above items dont you have?
i have all now
Reply
#4
(07-05-2014, 02:33 PM)fmano Wrote: i have all now
Good. Now, extract all of them and put all the files in one folder. Next, you're going to use SP flash tool to flash these files into the bricked M3. Follow this guide @
http://forum.hovatek.com/showthread.php?tid=159
Reply
#5
(07-05-2014, 03:04 PM)hovatek Wrote:
(07-05-2014, 02:33 PM)fmano Wrote: i have all now
Good. Now, extract all of them and put all the files in one folder. Next, you're going to use SP flash tool to flash these files into the bricked M3. Follow this guide @
http://forum.hovatek.com/showthread.php?tid=159

my sp flash tool is not responding I have 2 versions =3.1224.01 and 5.1343.01 the first say invalid scatter file and d other will load but when u click on download it will read and stop and displays this message: PMT changed for the ROM it must be downloaded:
Reply
#6
(07-05-2014, 03:04 PM)hovatek Wrote:
(07-05-2014, 02:33 PM)fmano Wrote: i have all now
Good. Now, extract all of them and put all the files in one folder. Next, you're going to use SP flash tool to flash these files into the bricked M3. Follow this guide @
http://forum.hovatek.com/showthread.php?tid=159
i have flashed all the files to the phone but is still stuck to boot loop
Reply
#7
(07-07-2014, 02:05 PM)fmano Wrote: i have flashed all the files to the phone but is still stuck to boot loop
use the format option first before flashing the ROM again
Reply
#8
(07-07-2014, 02:05 PM)fmano Wrote: i have flashed all the files to the phone but is still stuck to boot loop
use the format option first before flashing the ROM again
Reply
#9
If this issue persists then contact a Hovatek representative via whatsapp for live assistance. see our whatsapp number below
Reply
#10
if you are sure that u successfully flashed the ROM to ur t.m3 ..then try flashing cwm to ur device ..reboot the device to recovery mode ..while in recovery mode WIPE THE DALVIK CACHE, WIPE DATA/FACTORY RESET THEN FINALLY WIPE CACHE PARTITION ..then reboot ur device and wait for a few mins ..i guess it shud solve ur problem Big Grin
Reply







Users browsing this thread:
1 Guest(s)