[alimalamm]

Nooo actually it is dead or bricked as we say. I bricked it when i was trying to flash the phone with the above da files. So in miracle box i forgot to untick " format flash"

Sent from my Z2 using Tapatalk

[alimalamm]

So what can i try now to force the phone flash the hole firmware

Sent from my Z2 using Tapatalk

[hovatek]

So what can i try now to force the phone flash the hole firmware

Sent from my Z2 using Tapatalk

Disconnect and reconnect the battery
then flash all except system. The device should be able to boot at least

[alimalamm]

Yesss i did so. Then i flashed the way mention above. So the phone boot but in a bootloop gave the following message

" Red state
Your device has failed verification and may not work properly
Please download boot image with correct signature or disable verified boot
Your device will reboot in 5secs "

Also i have gone through the folder containing the firmware and i have noticed there verified sing images and normal images


Envoyé de mon Mi 9 SE en utilisant Tapatalk

[hovatek]

Yesss i did so. Then i flashed the way mention above. So the phone boot but in a bootloop gave the following message

" Red state
Your device has failed verification and may not work properly
Please download boot image with correct signature or disable verified boot
Your device will reboot in 5secs "

Also i have gone through the folder containing the firmware and i have noticed there verified sing images and normal images

Envoyé de mon Mi 9 SE en utilisant Tapatalk

If I get you right, system is the only file you've been unable to flash right?
I also want you to flash the blank vbmeta provided in method 3 @ https://forum.hovatek.com/thread-32719.html to the vbmeta partition and give feedback

[alimalamm]

Due to the fact that my phone is in the red state as mention my respond above i am unable to enter fastboot mode via recovery.
So i tried to replace the existing vbmeta image in the stock rom folder with the one you ask me to download above.
When i loaded the scatter file in sp flashtool it gave me the folloWing error

Envoyé de mon Mi 9 SE en utilisant Tapatalk

[hovatek]

Due to the fact that my phone is in the red state as mention my respond above i am unable to enter fastboot mode via recovery.
So i tried to replace the existing vbmeta image in the stock rom folder with the one you ask me to download above.
When i loaded the scatter file in sp flashtool it gave me the folloWing error
Envoyé de mon Mi 9 SE en utilisant Tapatalk

Delete the checksum file in the firmware folder or create another using https://forum.hovatek.com/thread-23301.html

[alimalamm]

I actually created a new checksum.ini file using the procedure in the forum. It was successful but still the system image won't flash in the phone

Envoyé de mon Mi 9 SE en utilisant Tapatalk

[hovatek]

I actually created a new checksum.ini file using the procedure in the forum. It was successful but still the system image won't flash in the phone

Envoyé de mon Mi 9 SE en utilisant Tapatalk

What error did flashing system give?

[alimalamm]

This is the screen shot of the error

Envoyé de mon Mi 9 SE en utilisant Tapatalk