[Allen Andrew]

I flashed a tecno clone device (honor Hol T00) because it had a booting problem, unfortunately I didn't backup the previous software that was in the phone, now I can't get it to start, could you please help me?

[X3non]

I flashed a tecno clone device (honor Hol T00) because it had a booting problem, unfortunately I didn't backup the previous software that was in the phone, now I can't get it to start, could you please help me?

do you mean that the phone is totally dead or stuck at bootlogo?
which firmware did you flash the device with?
what's the chipset of the device? mt6***
found this similar looking firmware @ https://needromng.com/huawei-hol-t00-clo...lash-file/

[Allen Andrew]

I flashed a tecno clone device (honor Hol T00) because it had a booting problem, unfortunately I didn't backup the previous software that was in the phone, now I can't get it to start, could you please help me?

do you mean that the phone is totally dead or stuck at bootlogo?
which firmware did you flash the device with?
what's the chipset of the device? mt6***
found this similar looking firmware @ https://needromng.com/huawei-hol-t00-clo...lash-file/

It's mt6582, I flashed it with this file [ Login / Register to download free] and flashed it, it completed the flashing successfully, but won't boot at all!! Totally dead!! I left it on charge for almost 3 days now, still nothing.

[hovatek]

Take out and reinsert the battery. If still dead then you'll need a different firmware from the one you flashed

[X3non]

disconnect / reconnect the battery of the device then re-flash the first firmware, skip userdata and perform a factory reset in recovery mode or better still emmc wipe in factory mode

[Allen Andrew]

disconnect / reconnect the battery of the device then re-flash the first firmware, skip userdata and perform a factory reset in recovery mode or better still emmc wipe in factory mode
Done this now, still nothing! Phone's still dead and won't boot or even charge.

[X3non]

Done this now, still nothing! Phone's still dead and won't boot or even charge.

did you disconnect / reconnect the battery after flashing the first firmware and the device still remains dead?

[Allen Andrew]

Done this now, still nothing! Phone's still dead and won't boot or even charge.

did you disconnect / reconnect the battery after flashing the first firmware and the device still remains dead?

Yes please!!

[X3non]

Yes please!!

when you flashed this same firmware the first time, did you flash all files including preloader (with the exception of userdata which failed)?
if yes, then you should test the emmc on the device, you can use cm2mtk for this

[Allen Andrew]

Yes please!!

when you flashed this same firmware the first time, did you flash all files including preloader (with the exception of userdata which failed)?
if yes, then you should test the emmc on the device, you can use cm2mtk for this

Please, where can I download the cm2mtk software?