[Mayor Kay]

Hi everyone, after flashing my phone with format all+download it wont come on or charge how do I fix it please. thanks in advance.

[X3non]

Hi everyone, after flashing my phone with format all+download it wont come on or charge how do I fix it please. thanks in advance.

what's the phone model?
was the flashing attempt successful with a green tick? or it ended with an error?
have you tried disconnecting / reconnecting the battery and the device is still dead?

[Mayor Kay]

Hi everyone, after flashing my phone with format all+download it wont come on or charge how do I fix it please. thanks in advance.

what's the phone model?
was the flashing attempt successful with a green tick? or it ended with an error?
have you tried disconnecting / reconnecting the battery and the device is still dead?

Tecno w3 yeah i didnt understand though it ended with error but i retried download only and it was successful with a green tick but still the phone is not showing signs of being alive.

[X3non]

Tecno w3 yeah i didnt understand though it ended with error but i retried download only and it was successful with a green tick but still the phone is not showing signs of being alive.

you skipped the last question about the battery
also did you take note of the build number of the phone before flashing it? did it match the build number of the firmware you flashed?
if not, then you might want to try other W3 firmware builds, you can try flashing the component files from the list @ https://forum.hovatek.com/thread-19340.html ; if any of them is able to get the device to at least power on, then download the full firmware and flash

[Mayor Kay]

Tecno w3 yeah i didnt understand though it ended with error but i retried download only and it was successful with a green tick but still the phone is not showing signs of being alive.

you skipped the last question about the battery
also did you take note of the build number of the phone before flashing it? did it match the build number of the firmware you flashed?
if not, then you might want to try other W3 firmware builds, you can try flashing the component files from the list @ https://forum.hovatek.com/thread-19340.html ; if any of them is able to get the device to at least power on, then download the full firmware and flash

Yes the build number matches with the firmware but i discovered something in my firmware files. It had .IMG ane .BIN Files altogether. And about the battery i removed and reinserted it still no responce but i will check the thread and get back to you.

[Mayor Kay]

And i am trying what i saw in this post maybe it might help.
https://forum.hovatek.com/thread-808.html

[X3non]

Yes the build number matches with the firmware but i discovered something in my firmware files. It had .IMG ane .BIN Files altogether. And about the battery i removed and reinserted it still no responce but i will check the thread and get back to you.

what was the build number of your device before flashing it? also what was the problem of the device before flashing? and the build number of the firmware you flashed with?
there's nothing wrong with the file formats

And i am trying what i saw in this post maybe it might help.
https://forum.hovatek.com/thread-808.html

it won't seeing as you already disconnected / reconnected the battery, and if this is the case then it's either you've flashed the wrong firmware or emmc chip is faulty

[Mayor Kay]

it won't seeing as you already disconnected / reconnected the battery, and if this is the case then it's either you've flashed the wrong firmware or emmc chip is faulty
[/quote]

Tecno W3(w3-H806A1-M-170204v109
the problem before flashing was that it was stuck at TECNO "bootloop" and after flashing with format all+download it refused to switch on.

[X3non]

Tecno W3(w3-H806A1-M-170204v109
the problem before flashing was that it was stuck at TECNO "bootloop" and after flashing with format all+download it refused to switch on.

i will assume that the build number posted above is same as the phone original build and the firmware build, if that is the case, get a tool such as cm2mtk and test the emmc chip of this device if faulty or not

[Mayor Kay]

Tecno W3(w3-H806A1-M-170204v109
the problem before flashing was that it was stuck at TECNO "bootloop" and after flashing with format all+download it refused to switch on.

i will assume that the build number posted above is same as the phone original build and the firmware build, if that is the case, get a tool such as cm2mtk and test the emmc chip of this device if faulty or not

Yes the build number is same as phone original build. I will do that and get back to you.