My Infinix x680 Hot 9 Play 32 + 2 D Stock On Boot Logo

[Please help] My Infinix x680 Hot 9 Play 32 + 2 D Stock On Boot Logo

donshedo
Enthusiastic Member

5

11-03-2021, 08:26 PM

#1

My Infinix x680 Hot 9 Play (32 + 2 D) Stock On Boot logo after I successfully bypassed Frp lock with Miracle Box.

If I'm to do a complete flash, which of the firmware here https://www.hovatek.com/forum/thread-34420.html can I use?

Please help

This post was last modified: 12-03-2021, 02:46 AM by donshedo. Edit Reason: Omitted an important Point

Attached Files

IMG_20210311_202158_compress24.jpg
Size: 44 KB / Downloads: 11

IMG_20210311_202224_compress4.jpg
Size: 120.48 KB / Downloads: 12

X3non
Recognized Contributor

22,062

12-03-2021, 09:55 AM

#2

(11-03-2021, 08:26 PM)donshedo My Infinix x680 Hot 9 Play (32 + 2 D) Stock On Boot logo after I successfully bypassed Frp lock with Miracle Box.

If I'm to do a complete flash, which of the firmware here https://www.hovatek.com/forum/thread-34420.html can I use?

Please help

you'd be better off using spft to format frp partition then using miracle box to remove frp
try factory reset and wipe cache in recovery mode then confirm if the device is able to boot to homescreen

if you still need the firmware then either use read_info in miracle OR backup recovery.img then use method 7 @ https://www.hovatek.com/forum/thread-16005.html

This post was last modified: 12-03-2021, 09:56 AM by X3non.

donshedo
Enthusiastic Member

5

12-03-2021, 10:55 AM

#3

(12-03-2021, 09:55 AM)X3non
(11-03-2021, 08:26 PM)donshedo My Infinix x680 Hot 9 Play (32 + 2 D) Stock On Boot logo after I successfully bypassed Frp lock with Miracle Box.

If I'm to do a complete flash, which of the firmware here https://www.hovatek.com/forum/thread-34420.html can I use?

Please help

you'd be better off using spft to format frp partition then using miracle box to remove frp
try factory reset and wipe cache in recovery mode then confirm if the device is able to boot to homescreen

if you still need the firmware then either use read_info in miracle OR backup recovery.img then use method 7 @ https://www.hovatek.com/forum/thread-16005.html

I did a factory reset and also cleared Cache but to no avail.

It still didn't boot.

I also tried to Read_info/Dump the Scatter Files with Miracle Box but the phone connects and immediately disconnects without having to complete the process.

This post was last modified: 12-03-2021, 01:37 PM by donshedo.

X3non
Recognized Contributor

22,062

13-03-2021, 09:00 AM

#4

(12-03-2021, 10:55 AM)donshedo ...
I also tried to Read_info/Dump the Scatter Files with Miracle Box but the phone connects and immediately disconnects without having to complete the process.

ensure that you are using the DA file for x680 @ https://www.hovatek.com/forum/thread-23339.html and also ensure that the device is switched off properly before you connect it to the PC

or if you are having problems with that, then use mtkbypass @ https://www.hovatek.com/forum/thread-37957.html , then make a readback of pgpt @ https://www.hovatek.com/forum/thread-21970.html to get the addr for recovery, then you can readback only recovery and get the build number

This post was last modified: 13-03-2021, 09:03 AM by X3non.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions