Help with Beneve M1035SE_EEA
Help with Beneve M1035SE_EEA
(14-04-2021, 08:21 PM)nheaven(14-04-2021, 12:52 PM)X3non(14-04-2021, 05:36 AM)nheaven I have change the share permission of the google drive, please try to download the files again.
The start addr for "ANDROID" in boot.img is far beyond the size of FDL files. The boot.img in the PAC file of the firmware is not a signed image.
I think we should find the secure flag in the uboot-sign.img, I have upload the uboot-sign.img in the google drive, please take a look at it.
uboot is the same as fdl2, anyways removing offset 0 - 200 from your files should result to unsigning the file
don't understand what is offset 0-200.
do you mean from address 00000000 to address 00000200?
(15-04-2021, 03:08 AM)nheaven Hello, I remove all the digits from address 00000000 to address 00000200, and try to flash the fdl files using research download tool, but when it is flashing FDL2, it stop with a message of "Failed: verify error".
It seems remove the header of the file do not solve the problem. Is there other way that can remove the secure flag?
(15-04-2021, 11:29 AM)X3non(15-04-2021, 03:08 AM)nheaven Hello, I remove all the digits from address 00000000 to address 00000200, and try to flash the fdl files using research download tool, but when it is flashing FDL2, it stop with a message of "Failed: verify error".
It seems remove the header of the file do not solve the problem. Is there other way that can remove the secure flag?
removing the header removes the sign flag, in turn causes the verification to fail (not sure what you expected to happen)
like i said before flashing firmware from a different device will not work and if you proceed to force it then you'll only end up bricking your device
(17-04-2021, 04:23 AM)nheaven hi, I have open the tablet's case, and find out that the broad of the tablet is: Incartech S863-7731e-v2.0 191006c. If you know where to download the firmware, please inform me, thanks.
(17-04-2021, 11:41 AM)X3non(17-04-2021, 04:23 AM)nheaven hi, I have open the tablet's case, and find out that the broad of the tablet is: Incartech S863-7731e-v2.0 191006c. If you know where to download the firmware, please inform me, thanks.
either you look for a working phone to backup firmware OR you try to contact the oem or vendor of this device (maybe they can provide you a firmware link)
(03-09-2021, 02:56 AM)nheaven Hello, I have managed to extract the firmware from another duoduogo g20 tablet by using the Infinity CM2, now my tablet can boot again.
(03-09-2021, 02:56 AM)nheaven Next, I will try to root this device, I will ask more question later
(03-09-2021, 06:55 PM)X3non(03-09-2021, 02:56 AM)nheaven Hello, I have managed to extract the firmware from another duoduogo g20 tablet by using the Infinity CM2, now my tablet can boot again.
can you share your backup? it might help someone else
(03-09-2021, 02:56 AM)nheaven Next, I will try to root this device, I will ask more question later
the device runs on android 10 right? you'd just have to hope that the device uses the generic key, unlocking the bootloader method ; see https://www.hovatek.com/forum/thread-32287.html
(04-09-2021, 07:11 AM)nheaven I will attach the backup here, but it seems that I can not upload a zip file at this post
(04-09-2021, 12:25 PM)X3non(04-09-2021, 07:11 AM)nheaven I will attach the backup here, but it seems that I can not upload a zip file at this post
you can compress the firmware files using 7zip software then upload the compress file to any cloud storage e.g mega.nz then post the link to the file from mega