MTK phone bricked
MTK phone bricked
(24-04-2021, 11:25 PM)angelgar i tried to flash the files one by one and i was able to flash some files but the others gave me the
ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N(0xC002001B) verified boot is enabled. please download signed image(md1img-verified.img) or disable verified boot.
the files i was able to flash correctly are ( recovery, efuse, boot, system, cache and userdata
but still not able to turn on the phone still dead
(28-04-2021, 05:56 PM)monkeyisland hi evtl. i can help i got the same errors while flashing Oukitel WP6 "ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N(0xC002001B) verified boot is enabled. please download signed image(md1img-verified.img) or disable verified boot."Untick md1img-verified.img and flash again
I tried different versions of SpflashTool
I succesfully flashed the whole firmware with SP_Flash_Tool_v5.1744_Win
ASW1102YF_2201_T0718
But the device is still in bootloop .... Oukitel logo then battery logo ....... and so on.
fastboot is possible but unlocking Bootloader not possible.
(28-04-2021, 05:56 PM)monkeyisland hi evtl. i can help i got the same errors while flashing Oukitel WP6 "ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N(0xC002001B) verified boot is enabled. please download signed image(md1img-verified.img) or disable verified boot."Untick md1img-verified.img and flash again
I tried different versions of SpflashTool
I succesfully flashed the whole firmware with SP_Flash_Tool_v5.1744_Win
ASW1102YF_2201_T0718
But the device is still in bootloop .... Oukitel logo then battery logo ....... and so on.
fastboot is possible but unlocking Bootloader not possible.
(28-04-2021, 05:56 PM)monkeyisland hi evtl. i can help i got the same errors while flashing Oukitel WP6 "ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N(0xC002001B) verified boot is enabled. please download signed image(md1img-verified.img) or disable verified boot."Untick md1img-verified.img and flash again
I tried different versions of SpflashTool
I succesfully flashed the whole firmware with SP_Flash_Tool_v5.1744_Win
ASW1102YF_2201_T0718
But the device is still in bootloop .... Oukitel logo then battery logo ....... and so on.
fastboot is possible but unlocking Bootloader not possible.
(26-04-2021, 08:50 AM)X3non(24-04-2021, 11:25 PM)angelgar i tried to flash the files one by one and i was able to flash some files but the others gave me the
ERROR: STATUS_SEC_PUBK_AUTH_MISMATCH_N(0xC002001B) verified boot is enabled. please download signed image(md1img-verified.img) or disable verified boot.
the files i was able to flash correctly are ( recovery, efuse, boot, system, cache and userdata
but still not able to turn on the phone still dead
disconnect / reconnect the battery of the device then confirm if you can at least get the initial vibration when you attempt to power on the phone
if nothing happens and the phone still remains dead then look for and try flashing a different firmware
(28-04-2021, 10:39 PM)angelgar i finally was able to flash the firmware ASW1102YF_2201_T0718 and ASW1102YF_2201_T0735 ( i tried both) i did it with sp flash tool v5.1744
after reading the post monkeyisland made both firmwares flash succesfully and the phone finally turns on ( a huge progress) but now after oukitel logo it goes to factory mode and i can't get it off factory mode the opcions that are on the phone are ( auto test, manual test, test report, debug test, clear eMMC, version, and reboot ) i try reboot but comes back to factory mode i tried auto test then reboot i tried clear eMMC but always back to factory mode when i hit version it gives me the version i flashed but on IMEI its unknown could that be the problem?
any suggestions?
(29-04-2021, 12:02 PM)X3non(28-04-2021, 10:39 PM)angelgar i finally was able to flash the firmware ASW1102YF_2201_T0718 and ASW1102YF_2201_T0735 ( i tried both) i did it with sp flash tool v5.1744
after reading the post monkeyisland made both firmwares flash succesfully and the phone finally turns on ( a huge progress) but now after oukitel logo it goes to factory mode and i can't get it off factory mode the opcions that are on the phone are ( auto test, manual test, test report, debug test, clear eMMC, version, and reboot ) i try reboot but comes back to factory mode i tried auto test then reboot i tried clear eMMC but always back to factory mode when i hit version it gives me the version i flashed but on IMEI its unknown could that be the problem?
any suggestions?
you should check the vol down button on the phone, maybe it's stuck