[Tutorial] How to fix LG NVRAM Warning Err = 0x10 using LGUP
[Tutorial] How to fix LG NVRAM Warning Err = 0x10 using LGUP
Follow the steps below to fix NVRAM Warning Err = 0x10 on LG Android phones
Quote:In this video tutorial, I'll be explaining how to fix NVRAM WARNING Err = 0x10 on an LG Android device using LGUP. This usually happens after you have an issue with your NVRAM. Now, you need to have the kdz for your device model, you need to have the WIFI address for your model. You can find that under Hardware Info of the phone or the device and you need to have setup LGUP drivers and all, dll and everything like that. I'll link to all of that. Now, you boot the device into Download Mode of course and you connect it to the PC so that LGUP can launch. Now, ensure to load the kdz or tot for you model, I've loaded mine already then you click on PDM. Now you click on Start. Now the device is going to reboot into a Blue screen, you just wait for that. Now you have the Info Write menu so you just input the WiFi address you intend to write. You click Write Data. Now this is going to both write the firmware and write the WiFi address. Its going to fix the WiFi 0x10 on your device, just wait for it to be complete. When prompted, you can save the PDM.txt. So that's how to write WiFi address and fix WiFI 0x10 error on your LG Android device using LGUP