[Please help] TECNO K7 FLASH ERROR (ENABLE DRAM FAILED)
[Please help] TECNO K7 FLASH ERROR (ENABLE DRAM FAILED)
(12-04-2021, 10:04 AM)X3non k7 doesn't have secure boot
it's either you're using the wrong firmware or emmc chip is faulty, i suspect the latter seeing as you are unable to read info or dump firmware
are you able to perform a ramtest @ https://www.hovatek.com/forum/thread-21972.html ?
are you able to format all except bootloader using sp flash tool?
if you have cm2 dongle, you could try doing a flash ic (emmc) test
(12-04-2021, 08:09 AM)Abdulakeem14 use the guide @ https://www.hovatek.com/forum/thread-37957.html
(12-04-2021, 09:01 PM)Pasiante I've tried 8 firmwares which is about all the firmwares for K7 if my info about it serves me right, so if they're all wrong then I don't know...
I'll try a ramtest but as it is, yes I can't read info/dump firmware, I can't format all except bootloader (non of the format option are working) it's giving me the same error.
Can a crack version of CM2 work? If yes, do you have a link to one?