how to solve error 0x81000302, atcmd txrx LGUP
how to solve error 0x81000302, atcmd txrx LGUP
(21-04-2021, 11:33 AM)X3non(20-04-2021, 03:11 PM)winzzelle ok but on the gui it says dll not properly installed, install a dll msi (when i put the dll extracted from the firmware into the common folder)
did you rename it to LGUP_Common.dll?
and the folder location @ C:\Program Files (x86)\LG Electronics\LGUP\model\Common ?
(15-04-2021, 01:29 AM)winzzelle error 0x81000302, atcmd txrx on upgrade and refurbish
on partition dl the process completes on the gui but no process on the phone
LGUP 1.16.0.3
DLL Version 1.0.5.0
LG Q61
(23-04-2021, 10:22 AM)hovatek(15-04-2021, 01:29 AM)winzzelle error 0x81000302, atcmd txrx on upgrade and refurbish
on partition dl the process completes on the gui but no process on the phone
LGUP 1.16.0.3
DLL Version 1.0.5.0
LG Q61
Have you tried LGUP command line @ https://www.hovatek.com/forum/thread-38365.html ? Also, are you certain you have the right kdz for your phone's original carrier?
(24-04-2021, 03:15 AM)winzzelle yes, i tried command line, i have the right stock kdz "Q630N20c_00_KT_KR_OP_1111" i tried SPFlash Tool but i am not able to find scatter file or generate it from the MTKDroid Tools or LG FirmwareExtract
(27-04-2021, 09:04 AM)hovatek(24-04-2021, 03:15 AM)winzzelle yes, i tried command line, i have the right stock kdz "Q630N20c_00_KT_KR_OP_1111" i tried SPFlash Tool but i am not able to find scatter file or generate it from the MTKDroid Tools or LG FirmwareExtract
You can build a scatter file. First off, confirm you've extracted the kdz
You should find two files, one with preloader and other with pgpt in the name .
Seen them?
(28-04-2021, 10:07 AM)winzzelle i have seen them using LG FirmwareExtract v1.2.6.1
(28-04-2021, 03:23 PM)hovatek(28-04-2021, 10:07 AM)winzzelle i have seen them using LG FirmwareExtract v1.2.6.1
zip the pgpt and preloader file, upload and post the download link
(28-04-2021, 07:25 PM)winzzelle i'm not able to extract the 2 files only 1, preloader and with that after extraction the file size is 0KB, is there any other tool i can use for the extraction?
(30-04-2021, 12:01 PM)hovatek(28-04-2021, 07:25 PM)winzzelle i'm not able to extract the 2 files only 1, preloader and with that after extraction the file size is 0KB, is there any other tool i can use for the extraction?
This must mean the LG kdz extract tool gave a header error message
(30-04-2021, 06:54 PM)winzzelle yes, a header error message