[Please help] [Formatting mediatek MT6739],[Orange state bootloop mediatek MT6739,GIONEE F205]
[Please help] [Formatting mediatek MT6739],[Orange state bootloop mediatek MT6739,GIONEE F205]
(27-04-2021, 07:41 AM)nidhin Can I manual format all the partitions in a single operation to delete the partition table (starting of the scatter file to the end of its length).
(27-04-2021, 07:41 AM)nidhin Will all they be flashed back if I flash the stock firmware, as I can see only a few of them in the SP Tools download page and many of them in the scatter file.
(27-04-2021, 07:41 AM)nidhin Most the the partitions also have is_download : false. Is that an issue?
(27-04-2021, 01:59 PM)nidhin I followed the instructions in the link you provided for mtk bypass and formatted the whole flash except bootloader by UART COM PORT.
Now I am unable to flash the whole firmware back as it tells the IMG is too large for gnres.img . I can get to the recovery menu and also see charging screen but not flash custom recovery as it gives buffer error.
I can't also use USB preloader to flash files as it also gives error.
Only the uart through python works now (with mediatek usb port as driver and not preloader) as mentioned in the link.
I am attaching the screenshot of errors below
I am also stuck in boot at the logo. The gnres.img only has third party apps, nothing with boot, so I don't know if it is causing the issue.
Everything else is perfectly flashed.
What did I miss
(30-04-2021, 02:23 AM)nidhin I already tried it that doesn't work.you could not boot into recovery mode or you could but the device won't boot after doing a successful factory reset?
(30-04-2021, 02:23 AM)nidhin Is there an alternate way.
Would the bootloader have been locked now?
(30-04-2021, 02:23 AM)nidhin How can I enter fastboot without adb in my phone?
(01-05-2021, 04:05 AM)nidhin I can reboot to recovery and factory reset many times. All is ok. But I can't get past the logo when booting up. Maybe it is because I didn't flash the gnres.img. But I am unable to do it since it gives img too large error