Hovatek Forum MOBILE Android Tecno Camon 12 air is dead need help
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno Camon 12 air is dead need help

Tecno Camon 12 air is dead need help

sam31
sam31
sam31
Newbie
3
25-04-2021, 03:48 PM
#1



Hi!

I was flashing rom in "Tecno camon 12 air (KC3)" using miracle box. I checked format option too. It formatted the flash but when downloading flash in tecno it showed and error while installing vendor and stopped the flashing process. Now my phone is dead and miracle is not connecting with my phone it shows "Unstable comport". I tried different things but nothing is working.

I tried SP flash tool too but it shows Status_Brom_cmd_startcmd_fail error. I tried different DA file for Tecno camon 12 air KC3 too but nothing is working https://www.hovatek.com/forum/images/smilies/sad.gif. I tried using SWD after sales tool too it shows the same error as in SP tool.

Need helppppp!
X3non
X3non
X3non
Recognized Contributor
22,062
26-04-2021, 09:52 AM
#2
(25-04-2021, 03:48 PM)sam31 Hi!

I was flashing rom in "Tecno camon 12 air (KC3)" using miracle box. I checked format option too. It formatted the flash but when downloading flash in tecno it showed and error while installing vendor and stopped the flashing process. Now my phone is dead and miracle is not connecting with my phone it shows "Unstable comport". I tried different things but nothing is working.

I tried SP flash tool too but it shows Status_Brom_cmd_startcmd_fail error. I tried different DA file for Tecno camon 12 air KC3 too but nothing is working https://www.hovatek.com/forum/images/smilies/sad.gif. I tried using SWD after sales tool too it shows the same error as in SP tool.

Need helppppp!

kc3 da is listed @ https://www.hovatek.com/forum/thread-23243.html and you probably are getting these errors because the device is stuck in flash mode, you'll need to properly power off the device (disconnect / reconnect the battery clip is the easiest) before attempting to reflash
sam31
sam31
sam31
Newbie
3
26-04-2021, 11:45 AM
#3
(26-04-2021, 09:52 AM)X3non
(25-04-2021, 03:48 PM)sam31 Hi!

I was flashing rom in "Tecno camon 12 air (KC3)" using miracle box. I checked format option too. It formatted the flash but when downloading flash in tecno it showed and error while installing vendor and stopped the flashing process. Now my phone is dead and miracle is not connecting with my phone it shows "Unstable comport". I tried different things but nothing is working.

I tried SP flash tool too but it shows Status_Brom_cmd_startcmd_fail error. I tried different DA file for Tecno camon 12 air KC3 too but nothing is working https://www.hovatek.com/forum/images/smilies/sad.gif. I tried using SWD after sales tool too it shows the same error as in SP tool.

Need helppppp!

kc3 da is listed @ https://www.hovatek.com/forum/thread-23243.html and you probably are getting these errors because the device is stuck in flash mode, you'll need to properly power off the device (disconnect / reconnect the battery clip is the easiest) before attempting to reflash

Thanks for replying, I will try by removing battery. The battery is non-removeable so i was hesitating in opening case of the mobile, but now i guess i have no other choice.
sam31
sam31
sam31
Newbie
3
30-04-2021, 12:08 AM
#4
(26-04-2021, 09:52 AM)X3non
(25-04-2021, 03:48 PM)sam31 Hi!

I was flashing rom in "Tecno camon 12 air (KC3)" using miracle box. I checked format option too. It formatted the flash but when downloading flash in tecno it showed and error while installing vendor and stopped the flashing process. Now my phone is dead and miracle is not connecting with my phone it shows "Unstable comport". I tried different things but nothing is working.

I tried SP flash tool too but it shows Status_Brom_cmd_startcmd_fail error. I tried different DA file for Tecno camon 12 air KC3 too but nothing is working https://www.hovatek.com/forum/images/smilies/sad.gif. I tried using SWD after sales tool too it shows the same error as in SP tool.

Need helppppp!

kc3 da is listed @ https://www.hovatek.com/forum/thread-23243.html and you probably are getting these errors because the device is stuck in flash mode, you'll need to properly power off the device (disconnect / reconnect the battery clip is the easiest) before attempting to reflash

Your provided solution worked. The error "Status_Brom_cmd_startcmd_fail" is now resolved. Now I am getting a new error i.e "STATUS_SEC_AUTH_FILE_NEEDED" I searched for the solution on the forum and the solution is to use custom authentication file for the model. But I am unable to find any authentication file for the Mobile( Tecno camon 12 air KC3). All available files are DA files.

Please Help!
Thanks in Advance...
X3non
X3non
X3non
Recognized Contributor
22,062
30-04-2021, 09:55 AM
#5



(30-04-2021, 12:08 AM)sam31 Your provided solution worked. The error "Status_Brom_cmd_startcmd_fail" is now resolved. Now I am getting a new error i.e "STATUS_SEC_AUTH_FILE_NEEDED" I searched for the solution on the forum and the solution is to use custom authentication file for the model. But I am unable to find any authentication file for the Mobile( Tecno camon 12 air KC3). All available files are DA files.

Please Help!
Thanks in Advance...

you can try the auth file for f2 lte @ https://www.hovatek.com/forum/thread-23243.html
OR better still flash using mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
OR use SWD tool (format all + download) @ https://www.hovatek.com/forum/thread-23709.html
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram