Hovatek Forum MOBILE Android Tecno kd7 unable to flash completely.
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno kd7 unable to flash completely.

Tecno kd7 unable to flash completely.

blake007
blake007
blake007
Enthusiastic Member
6
04-05-2021, 08:05 AM
#1



I tried flashing the firmware of tecno kd7 on the hovatek site on a kd7, but it brought back a mismatch error. I have tried flashing ot one by one using sp flash tool, but tkv, dtbo, vbmeta_system, vbmeta_vendor, and super partitions refuse to flash. I have tried removing the battery too. It doesn't work. There are so many variants of this tecno kd7. This file on hovatek doesn't indicate if it is of 3/64 or 4/64. Like I posted before, the build in the recovery is:Tecno Kd7-GL/TECNO-kd7 10/QP1A.190711.020./FQRSTU-GL-201221v364. Please help me get out of this mess. Thanks in advance.
hovatek
hovatek
hovatek
Administrator
49,570
04-05-2021, 04:28 PM
#2
(04-05-2021, 08:05 AM)blake007 I tried flashing the firmware of tecno kd7 on the hovatek site on a kd7, but it brought back a mismatch error. I have tried flashing ot one by one using sp flash tool, but tkv, dtbo, vbmeta_system, vbmeta_vendor, and super partitions refuse to flash. I have tried removing the battery too. It doesn't work. There are so many variants of this tecno kd7. This file on hovatek doesn't indicate if it is of 3/64 or 4/64. Like I posted before, the build in the recovery is:Tecno Kd7-GL/TECNO-kd7 10/QP1A.190711.020./FQRSTU-GL-201221v364. Please help me get out of this mess. Thanks in advance.

1. Which version of SP flash tool are you using? Hope its the latest
2. Try using format all + download then download only using the bypass @ https://www.hovatek.com/forum/thread-37957.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
blake007
blake007
blake007
Enthusiastic Member
6
05-05-2021, 03:38 PM
#3
I think I've made it even worse...I formated whole flash of the tecno kd7. Now the phone won't boot at all. When flashing with sp flashtool, it brings error: status_sec_auth_file_needed. Swd tool just shows DA connecting and then it fails. Miracle box just shows: boot not support the phone or cpu bad. Please o, help me, I carry God beg you. Thank you in advance. Sorry for the disturbance.
X3non
X3non
X3non
Recognized Contributor
22,062
06-05-2021, 10:02 AM
#4
(05-05-2021, 03:38 PM)blake007 I think I've made it even worse...I formated whole flash of the tecno kd7. Now the phone won't boot at all. When flashing with sp flashtool, it brings error: status_sec_auth_file_needed. Swd tool just shows DA connecting and then it fails. Miracle box just shows: boot not support the phone or cpu bad. Please o, help me, I carry God beg you. Thank you in advance. Sorry for the disturbance.

ensure to use the mtk bypass method @ https://www.hovatek.com/forum/thread-37957.html ; it should not require auth
blake007
blake007
blake007
Enthusiastic Member
6
07-05-2021, 02:54 AM
#5



I used the mtk bypass method, the phone was able to turn on, but in it's red state form. Every partition was able to flash except tkv and transf. When I try to flash this two partions, it bring back the image mismatch error. Just in case, I flashed th other partitions before flashing vbmeta vendor, vbmeta system, vb meta and super.
blake007
blake007
blake007
Enthusiastic Member
6
07-05-2021, 03:34 AM
#6
Yessss. I did it. With your help though. Thank you. Like I said before, I used the mtk bypass method to flash the phone. I omitted tkv and tranfs partitions before flashing with sp flash tool. The only problem now is the imei, which is corrupt. I'll try to use muimeta to write the imei and see if it works. Again. Thanks a lot.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram