Stuck at "Found port = COM#"
Stuck at "Found port = COM#"
(17-05-2021, 03:46 PM)xExorTx Update:Flash each files separately
So I've managed to "flash" the stock rom for Oppo A5s that I got from this forum:
https://www.hovatek.com/forum/thread-9271.html
Oppo A5S (CPH1909_11_A.30_191026) to be exact
however, before a success, I always keep getting "BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)" and is tied to "opporeserve2.img" not being verified and thus, SPFT kept saying that I need a verified version of it or disable verified boot.
now phone is stuck like this:
What else can I do now?
(18-05-2021, 05:25 AM)xExorTx I followed your advice and ended up the same with Download Failed 0x992566 like the one above.
I also ran to the same problem with verified boot and opporeserve2.img
(18-05-2021, 02:52 PM)X3non see the guide @ https://forum.xda-developers.com/t/guide...e.4222027/
scroll down until you find the spoiler for troubleshooting - faqs and fixes, try the two methods listed there, see if it helps
(18-05-2021, 04:02 PM)xExorTx Followed the first solution, still getting the verified img problem.
(18-05-2021, 04:02 PM)xExorTx I don't know how to fully do the 2nd solution since I don't have:
...
the only things inside the extracted folder from OFP were this:...
(18-05-2021, 04:02 PM)xExorTx Followed the first solution, still getting the verified img problem.
I don't know how to fully do the 2nd solution since I don't have:
(19-05-2021, 10:17 AM)hovatek What version of SP flash tool are you using?
Was it only 2 partitions that gave that error?
(19-05-2021, 10:09 AM)X3non retry again but use the all-in-one-signature.bin as download-agent from within your extracted ofp
you can also try without using mtk bypass (i.e remove the device filter) then try flashing normally using the da above and the auth file in the extracted ofp folder
(19-05-2021, 11:36 AM)xExorTx I'm using ver. 5.2112 and only opporeserve2.img does give me error with the verified img problem.
(19-05-2021, 11:36 AM)xExorTx using the Auth file seems fine but the all-in-one-signature.bin fetches me:
S_INVALID_DA_FILE (5002)
seems it wants me to "re-fetch" the latest version of it.