rooting hisense f23
rooting hisense f23
(02-06-2021, 10:07 AM)X3nonoh ok i see what you mean, cause i thought i had to read the block map and enter start and end memory address for my scatter file.Ok will proceed on your post now and see if i encounter errors.The python and everything is working great but gonna do waht you said now(01-06-2021, 04:07 PM)kronos yes it was said to go to this tool and look at the memory address and the second attachment mine shows no data so i cannot edit the temp scatter file
the instruction at step 8 @ https://www.hovatek.com/forum/thread-21970.html is to see how readback is done with sp flash tool, you're to skip everything pertaining to mtk droid tool
again it's indicated in the requirements section @ https://www.hovatek.com/forum/thread-526.html ; to skip mtk droid tool if using wwr mtk
PS : watch the video guide for wwr mtk to understand better
(03-06-2021, 04:08 PM)kronospython is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup(02-06-2021, 10:07 AM)X3nonoh ok i see what you mean, cause i thought i had to read the block map and enter start and end memory address for my scatter file.Ok will proceed on your post now and see if i encounter errors.The python and everything is working great but gonna do waht you said now(01-06-2021, 04:07 PM)kronos yes it was said to go to this tool and look at the memory address and the second attachment mine shows no data so i cannot edit the temp scatter file
the instruction at step 8 @ https://www.hovatek.com/forum/thread-21970.html is to see how readback is done with sp flash tool, you're to skip everything pertaining to mtk droid tool
again it's indicated in the requirements section @ https://www.hovatek.com/forum/thread-526.html ; to skip mtk droid tool if using wwr mtk
PS : watch the video guide for wwr mtk to understand better
(03-06-2021, 11:54 PM)kronos python is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup
(04-06-2021, 12:30 PM)X3nonok gonna do it again and send screen shots(03-06-2021, 11:54 PM)kronos python is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup
you should attach a full screenshot of sp flash tool window along with the error message
(04-06-2021, 03:31 PM)kronosok this is all the information i can provide you whats actually happening.i hope this can help you.Do you want the scatter file also(04-06-2021, 12:30 PM)X3nonok gonna do it again and send screen shots(03-06-2021, 11:54 PM)kronos python is all sorted my device is connected via usb all drivers correct but when i read back so i can get the ROM_0 read i get this error.No matter what i do i get different errors its like the phne is not connected but it is as it shows in my powershell i am connected on my port 7 where the libs driver was installed...i totally give up.This phone just wont let me backup
you should attach a full screenshot of sp flash tool window along with the error message
(05-06-2021, 12:12 PM)X3nonOk gonna create an empty scatter file(04-06-2021, 03:56 PM)kronos ok this is all the information i can provide you whats actually happening.i hope this can help you.Do you want the scatter file also
retry again using empty scatter file made from wwr v2.51