How to instal driver from another mtk phone for sp tools
How to instal driver from another mtk phone for sp tools
(06-06-2015, 05:04 PM)hovatek(06-06-2015, 03:20 PM)agbelex Ok sir! It has bin connected to wall charger since morning.
Will it later show d battery charging icon wen it comes on or i will hav to press d power button to knw wen to proceed wt d flashing?
Thanks
if the phone could charge (show the charging sign) before you tried flashing the you should see a charging sign to signal that its back to life
re-install vcom drivers using https://www.hovatek.com/forum/thread-440.html , remoove the battery and slot back in then try flashing again
(09-06-2015, 07:46 AM)agbelex My hard bricked Infinix-X551 has been connected to wall charger since for 6days now, still there is no sign of life. No charging icon, shows "usb not recognised" when connected to pc.
Pls help. Am getting worried. Thanks
Sent from my Infinix-X551 using Hovatek mobile
(09-06-2015, 10:48 AM)barnpat Format the phone using sp flash
Select format all/download on the sp flash and then plug your dead phone to your pc using usb cable
Sent from my Infinix X507 using Hovatek mobile
(09-06-2015, 07:41 PM)agbelex The phone shows cusb not recognised" when connected to pc. Sp tools wouldnt respond when phone is connected. Iv installed and reinstalled d vcim drivers several times.
(09-06-2015, 10:03 PM)hovatek(09-06-2015, 07:41 PM)agbelex The phone shows cusb not recognised" when connected to pc. Sp tools wouldnt respond when phone is connected. Iv installed and reinstalled d vcim drivers several times.
try @barnpat's format option and lets see how that goes
you might need to have the battery taken out