Hovatek Forum MOBILE Android SAMSUNG A30S CLONE HUNG ON LOGO
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


SAMSUNG A30S CLONE HUNG ON LOGO

SAMSUNG A30S CLONE HUNG ON LOGO

laban kamonya
laban kamonya
laban kamonya
Junior Member
18
11-07-2021, 12:29 PM
#1



Connected to Phone.
CPU: MT6570 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x00E7000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
Reading infr(EMMC)...
WIFI MAC:00120D3B35F6
BT_ADDR:1234567ACECD
IMEI1:358200702276399
IMEI2:358200702276407
id:MRA58K test-keys
version:6.0
model:A30s
brand:alps
manufacturer:alps
Done.
I NEED IT'S FIRMWARE , THANKS IN ADVANCE @HOVATEK
laban kamonya
laban kamonya
laban kamonya
Junior Member
18
11-07-2021, 10:01 PM
#2
I got the firmware from paid services, but on flashing an getting the sp tool error  STATUS_MMC_ERR (0XC0040030)
ANY SOLUTION?
the phone was stuck at logo
Can go into recovery but doesn't finish formating data
Can boot into fastboot but fastboot not detected on PC.

Sent from my TECNO CF7 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
12-07-2021, 10:57 AM
#3
(11-07-2021, 12:29 PM)laban kamonya ...

take a full firmware backup of the device as it is (you can use any tool for this e.g miracle thunder, e.t.c)
once backup is complete, format all except userdata using sp flash tool then confirm if the device is still able to boot to logo or not
laban kamonya
laban kamonya
laban kamonya
Junior Member
18
19-07-2021, 07:59 AM
#4
(12-07-2021, 10:57 AM)X3non
(11-07-2021, 12:29 PM)laban kamonya
...


take a full firmware backup of the device as it is (you can use any tool for this e.g miracle thunder, e.t.c)
once backup is complete, format all except userdata using sp flash tool then confirm if the device is still able to boot to logo or not

Thanks @ X3non let me give it a try anf see if it works. I will post the results here.

Sent from my TECNO CF7 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
19-07-2021, 01:22 PM
#5



(19-07-2021, 07:59 AM)laban kamonya Thanks @ X3non let me give it a try anf see if it works. I will post the results here.

Sent from my TECNO CF7 using Hovatek Mobile

correction in my previous reply, it's format all except preloader in sp flash tool
laban kamonya
laban kamonya
laban kamonya
Junior Member
18
24-07-2021, 01:18 PM
#6
(19-07-2021, 01:22 PM)X3non
(19-07-2021, 07:59 AM)laban kamonya
Thanks @ X3non let me give it a try anf see if it works. I will post the results here.

Sent from my TECNO CF7 using Hovatek Mobile


correction in my previous reply, it's format all except preloader in sp flash tool

I did format all ,and formating was done well but on flashing the rom i got the same emmc error . And now it's dead completely i think it's emmc had a problem.
But thank you for your support.

Sent from my TECNO CF7 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
26-07-2021, 09:57 AM
#7
(24-07-2021, 01:18 PM)laban kamonya I did format all ,and formating was done well but on flashing the rom i got the same emmc error . And now it's dead completely i think it's emmc had a problem.
But thank you for your support.

Sent from my TECNO CF7 using Hovatek Mobile

did you try restoring your backup? if yes, can you confirm if the device is able to power back on or not?
laban kamonya
laban kamonya
laban kamonya
Junior Member
18
13-08-2021, 09:25 PM
#8
(26-07-2021, 09:57 AM)X3non
(24-07-2021, 01:18 PM)laban kamonya
I did format all ,and formating was done well but on flashing the rom i got the same emmc error . And now it's dead completely i think it's emmc had a problem.
But thank you for your support.

Sent from my TECNO CF7 using Hovatek Mobile


did you try restoring your backup? if yes, can you confirm if the device is able to power back on or not?

The restore was unsuccessful too, it could not restore.

Sent from my unknown using Hovatek Mobile
hovatek
hovatek
hovatek
Administrator
49,570
14-08-2021, 12:40 PM
#9
(11-07-2021, 10:01 PM)laban kamonya I got the firmware from paid services, but on flashing an getting the sp tool error  STATUS_MMC_ERR (0XC0040030)
ANY SOLUTION?
the phone was stuck at logo
Can go into recovery but doesn't finish formating data
Can boot into fastboot but fastboot not detected on PC.

Sent from my TECNO CF7 using Hovatek Mobile

Share a screenshot of this error message

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram