Hovatek Forum MOBILE Android Error
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Error

Error

Pages (4): Previous 1 2 3 4 Next
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
01-09-2021, 05:55 AM
#21



(31-08-2021, 08:58 PM)San5223 if it is faulty that means i wil forget flashing and change the emc or change the whole panel and does it means that when this method is use to check emmc an its its not more gud?
yes
X3non
X3non
X3non
Recognized Contributor
22,062
01-09-2021, 11:26 AM
#22
(31-08-2021, 08:58 PM)San5223 if it is faulty that means i wil forget flashing and change the emc or change the whole panel and does it means that when this method is use to check emmc an its its not more gud?

if you go with the option of replacing emmc then you'd still have to flash firmware
if you go with the option of replacing the pcb then flashing firmware isn't compulsory depending on the state you got the pcb, i.e if the device was booting fine then no point flashing

the above is just a simple method to test if the emmc is in read-only or not, it's basically testing if one is able to write to the device
This post was last modified: 01-09-2021, 11:28 AM by X3non.
San5223
San5223
San5223
Senior Member
151
01-09-2021, 12:07 PM
#23
wat of if its ok after running the test
San5223
San5223
San5223
Senior Member
151
01-09-2021, 12:12 PM
#24
i tried formatting boot partition but sp tool is given error 8401 INVALID FORMAT ADDRESS
X3non
X3non
X3non
Recognized Contributor
22,062
02-09-2021, 10:24 AM
#25



(01-09-2021, 12:12 PM)San5223 i tried formatting boot partition but sp tool is given error 8401 INVALID FORMAT ADDRESS

attach a full screenshot of spft showing the addr you use for begin addr and length and include the spft error message
while at it, you can try format all except bootloader
San5223
San5223
San5223
Senior Member
151
02-09-2021, 10:55 AM
#26
like hw i dnt understand
San5223
San5223
San5223
Senior Member
151
03-09-2021, 04:20 AM
#27
(02-09-2021, 10:24 AM)X3non
(01-09-2021, 12:12 PM)San5223 i tried formatting boot partition but sp tool is given error 8401 INVALID FORMAT ADDRESS

attach a full screenshot of spft showing the addr you use for begin addr and length and include the spft error message
while at it, you can try format all except bootloader
this is the screenshots and how do I format all except bootloader
Attached Files
.jpg
1_IMG_20210903_040247_1.jpg
Size: 88.24 KB / Downloads: 1
.jpg
1_IMG_20210903_040445_7.jpg
Size: 83.87 KB / Downloads: 1
X3non
X3non
X3non
Recognized Contributor
22,062
03-09-2021, 07:03 PM
#28
(03-09-2021, 04:20 AM)San5223 this is the screenshots and how do I format all except bootloader

can't see anything on your picture, use snipping tool to capture screenshots on windows
and the addr values you inputted are those for boot partition? it doesn't seem so

the option to format all except bootloader is under format tab > auto format
San5223
San5223
San5223
Senior Member
151
04-09-2021, 07:40 PM
#29
i tried formating whole flash except boot loader but i get the error 8400 NVRAM TARGET IS MISSING i also tried to flash the stock rom same with the build but using miracle box. but it will stuck at writing pgpt an say WRITE CODE ERROR pls help hovatek i need your help plss
X3non
X3non
X3non
Recognized Contributor
22,062
06-09-2021, 11:08 AM
#30



(04-09-2021, 07:40 PM)San5223 i tried formating whole flash except boot loader but i get the error 8400 NVRAM TARGET IS MISSING i also tried to flash the stock rom same with the build but using miracle box. but it will stuck at writing pgpt an say WRITE CODE ERROR pls help hovatek i need your help plss

i'll suggest that you look for cm2 dongle and perform a flash ic test, as far as i can tell, the emmc chip is faulty
trying to flash a device with faulty emmc is a big waste of time
This post was last modified: 06-09-2021, 11:09 AM by X3non.
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram