Hovatek Forum MOBILE Android Tecno Camon 12 ( CC7 ) Not responding to SP flash tool after bootloop
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno Camon 12 ( CC7 ) Not responding to SP flash tool after bootloop

Tecno Camon 12 ( CC7 ) Not responding to SP flash tool after bootloop

Grench
Grench
Grench
Newbie
3
28-08-2021, 12:50 PM
#1



Can someone help... My Tecno Camon 12 is in a constant bootloop after mistakenly flashing twrp in fastboot through fastboot flash recovery twrp.img... please help
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
29-08-2021, 04:04 PM
#2
(28-08-2021, 12:50 PM)Grench Can someone help... My Tecno Camon 12 is in a constant bootloop after mistakenly flashing twrp in fastboot through fastboot flash recovery twrp.img... please help
did you make a firmware back up? If you do flash it back or download and flash full firmware @ https://www.hovatek.com/forum/thread-31989.html
Grench
Grench
Grench
Newbie
3
29-08-2021, 04:49 PM
#3
(29-08-2021, 04:04 PM)Abdulakeem14
(28-08-2021, 12:50 PM)Grench Can someone help... My Tecno Camon 12 is in a constant bootloop after mistakenly flashing twrp in fastboot through fastboot flash recovery twrp.img... please help
did you make a firmware back up? If you do flash it back or download and flash full firmware @ https://www.hovatek.com/forum/thread-31989.html

I am trying but anytime i plug the phone in it just reboots and I cant stop it
The flash tool also gives errors
X3non
X3non
X3non
Recognized Contributor
22,062
30-08-2021, 11:37 AM
#4
(29-08-2021, 04:49 PM)Grench I am trying but anytime i plug the phone in it just reboots and I cant stop it
The flash tool also gives errors

If you're using a custom DA @ https://www.hovatek.com/forum/thread-23243.html then you'll need to power off the device completely before attempting to flash it. Either wait till the battery runs down completely then charge a little bit say 2% then flash or disassemble the device then disconnect/reconnect the battery clip

But if you're using mtk bypass @ https://www.hovatek.com/forum/thread-37957.html then you simply need to run main.py and keep it waiting then hold the boot key on your device + power button, keep holding the buttons until the device powers down and main.py will catch the device and perform a bypass then you can proceed to flashing
Grench
Grench
Grench
Newbie
3
30-08-2021, 03:35 PM
#5



(30-08-2021, 11:37 AM)X3non
(29-08-2021, 04:49 PM)Grench I am trying but anytime i plug the phone in it just reboots and I cant stop it
The flash tool also gives errors

If you're using a custom DA @ https://www.hovatek.com/forum/thread-23243.html then you'll need to power off the device completely before attempting to flash it. Either wait till the battery runs down completely then charge a little bit say 2% then flash or disassemble the device then disconnect/reconnect the battery clip

But if you're using mtk bypass @ https://www.hovatek.com/forum/thread-37957.html then you simply need to run main.py and keep it waiting then hold the boot key on your device + power button, keep holding the buttons until the device powers down and main.py will catch the device and perform a bypass then you can proceed to flashing

I did that but at this point the device is blank and it doesnt respond to sp flash tool
X3non
X3non
X3non
Recognized Contributor
22,062
31-08-2021, 10:19 AM
#6
(30-08-2021, 03:35 PM)Grench I did that but at this point the device is blank and it doesnt respond to sp flash tool

did what exactly?
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram