Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tecno H7 not being detected by SP Flash tools

#1
(This post was last modified: 06-06-2015, 03:31 AM by agbruce. )

My Tecno H7 got messed up after trying to flash a custom rom on it so i wanted to revive it by flashing the stock rom via SP Flash tools. When i load the files and connect it to PC all it does is light up the screen and keep rebooting while displaying some weird flashing colours. It also makes a 'connected sound' then disconnects again after about 3 seconds hence Flash tools cant even begin the process. Please guide me on what to do.
PS: 1. I can boot into CWM recovery normally
2: I tried to flash without a battery but got the same annoying connected then disconected problem
3: I believe i installed the necesary drivers as i followed your tutorial on that. I also installed Universal ADB Drivers but no change.


Reply
#2
(06-06-2015, 03:27 AM)agbruce Wrote: My Tecno H7 got messed up after trying to flash a custom rom on it so i wanted to revive it by flashing the stock rom via SP Flash tools. When i load the files and connect it to PC all it does is light up the screen and keep rebooting while displaying some weird flashing colours. It also makes a 'connected sound' then disconnects again after about 3 seconds hence Flash tools cant even begin the process. Please guide me on what to do.
PS: 1. I can boot into CWM recovery normally
2:  I tried to flash without a battery but got the same annoying connected then disconected problem
3:  I believe i installed the necesary drivers as i followed your tutorial on that. I also installed Universal ADB Drivers but no change.

do you have the H7 firmware and how did you get it?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)