Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

DEAD TECNO M7

#1
(This post was last modified: 06-10-2015, 02:48 PM by morolami. )

Please I need help with my dead Tecno M7 Phone.

When I leave it for sometimes like one month it will boot and work and then off again and not boot, and not charge.
The last time it boot I was able to back it up with MTK Tool for flashing with sp flash tools.
When i try to flash is it gives

BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Fail!
[HINT]: Please check your load matches to your target which is to be downloaded.


Reply
#2
(06-10-2015, 02:24 PM)morolami Wrote: Please I need help with my dead Tecno M7 Phone.

When I leave it for sometimes like one month it will boot and work and then off again and not boot, and not charge.
The last time it boot I was able to back it up with MTK Tool for flashing with sp flash tools.
When i try to flash is it gives

BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Fail!
[HINT]: Please check your load matches to your target which is to be downloaded.

1. uninstall then reinstall vcom drivers using  https://forum.hovatek.com/thread-440.html (or use another PC)
2. flash using sp flash tool v5 @  https://forum.hovatek.com/thread-159.html
if the error persists then supply a gmail address for our stock backup
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
Have tried that several times with the same error message.
my gmail address is [email protected]
Thanks
Reply
#4
(06-16-2015, 08:43 PM)morolami Wrote: Have tried that several times with the same error message.
my gmail address is [email protected]
Thanks

granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)