Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] my tecno m3 won't go pass boot logo

#51
(This post was last modified: 07-19-2015, 09:00 AM by Hapalet. )

I made a mistake earlier on by replacing the stock scatterfile with the same scatterfile cause I didn't notice the new one has modded in its name..am very sorry for being too forward

After replacing it I noticed usrdata and cache aint there again..so I tried downloading the rom into my device emmc error happened..tried firmware upgrade,that got me pass two stages (the red and the green bar each got to 100%) but when I made it to the purple bar at 8% I got that emmc error again..I even tried formatting though that got completed but it didnt fulfilled anything..please is there any thing wrong with my emmc?

Cause I have done everything to correct that error according to the error msgs you listed

Error 3149
Message: BROM ERROR : S_DA_SDMMC_
WRITE_FAILED (3149)
Meaning: SP Flash tool was unable to
flash files to the phone
Solution:
* Ensure to run the latest version of SP
flash tool as Administrator
* Get a complete ROM and select the
Formal all + Download option
* Ensure the phone is switched off (with
a well charged battery in it ) before
connecting to PC for flashing
* Try a different PC
* Try a different ROM
* Try a different USB cord
* Try formatting the phone first before
flashing files to it


Reply
#52
(This post was last modified: 07-19-2015, 11:21 AM by hovatek. )
(07-19-2015, 12:58 AM)Hapalet Wrote: After replacing it I noticed usrdata and cache aint there again..so I tried downloading the rom into my device emmc error happened..tried firmware upgrade,that got me pass two stages (the red and the green bar each got to 100%) but when I made it to the purple bar at 8% I got that emmc error again..I even tried formatting though that got completed but it didnt fulfilled anything..please is there any thing wrong with my emmc?

just might be your eMMC
try flashing one file at a time
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#53
Still the same thing can I use adb method to flash the rom into my phone cause I saw it somewhere ..
Reply
#54
(This post was last modified: 07-19-2015, 06:40 PM by hovatek. )
(07-19-2015, 01:57 PM)Hapalet Wrote: Still the same thing can I use adb method to flash the rom into my phone cause I saw it somewhere ..

adb sideload, yes but a flashable zip
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#55
What is a flashable zip?
Reply
#56
(07-19-2015, 07:57 PM)Hapalet Wrote: What is a flashable zip?

a zip file that can be flashed in recovery mode. just like a factory ROM or Custom ROM
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#57
Please help me with the adb procedure
Reply
#58
(07-21-2015, 02:57 PM)Hapalet Wrote: Please help me with the adb procedure

have you got a flashable zip?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#59
What about the ones I have the stock and the custom roms?
Reply
#60
I tried to use fastboot method to flash files into d phone like aio flasher..I tried using this keyword 'fastboot flash boot boot.img cause I started with boot and i got this message on adb screen.
sending 'boot' (6144kb)...
OKAY [0.297s]
Writing 'boot'...

While on the phone I got
USB transferring...
2kb/s ansmission OK time:266ms Vel:2365

Writing Flash...

What is the meaning of both message?am still waiting for what it will bring after that..but am I on the right path
Reply










Users browsing this thread:
1 Guest(s)