Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

HELP!!! tecno d5

#31

let's try META mode. before you connect the phone to PC for flashing, take out the battery and keep holding volume increase button then connect to PC. you can try volume decrease or both. ensure the battery isn't inserted.


Reply
#32
ι just tried vol up alone ..then vol down button alone ..then vol up and down together ..still getting the same dram not support error
Reply
#33
(08-05-2014, 09:30 AM)dabossq Wrote: ι just tried vol up alone ..then vol down button alone ..then vol up and down together ..still getting the same dram not support error

noted
Reply
#34
Device is proving тσ вє α нαʀɗ nut :'(
Reply
#35
The fne just decided тσ come on after flashing rom ƒσʀ t.d3 ..screen was white buh not pure white ..the phone booted normally and му pc read the device as tecno d3 ..buh now the device isn't coming on any more ..nor does му pc even recognise it ..ι checked and reinstalled the drivers again ..didn't change anything ..its back тσ α state worse than before
Reply
#36
(08-09-2014, 06:25 AM)X3non Wrote: The fne just decided тσ come on after flashing rom ƒσʀ t.d3 ..screen was white buh not pure white ..the phone booted normally and му pc read the device as tecno d3 ..buh now the device isn't coming on any more ..nor does му pc even recognise it ..ι checked and reinstalled the drivers again ..didn't change anything ..its back тσ α state worse than before

Lemme get you straight. Do you mean the phone booted to home screen after you flashed the D3 ROM?
Reply
#37
(08-09-2014, 08:55 AM)hovatek Wrote: Lemme get you straight. Do you mean the phone booted to home screen after you flashed the D3 ROM?

Yes ..well that's what ι think cos tho the screen was α bit white ..ι noticed that when ι held the POWER button something moved on the screen which means the fne was ON and alive ..and if the fne stuck on tecno logo that means holding the power button won't make movements on the screen ..that's why ι was suprised ..on му pc the fne's driver read TECNO d3 ..buh mtkdroid wasn't able тσ detect the device ..and ι couldn't check if usb debugging was on ..and moreover the fne didn't vibrate before coming ON

..So so. Confused on this type of miracle
Reply
#38
(08-09-2014, 11:22 AM)X3non Wrote: Yes ..well that's what ι think cos tho the screen was α bit white ..ι noticed that when ι held the POWER button something moved on the screen which means the fne was ON and alive ..and if the fne stuck on tecno logo that means holding the power button won't make movements on the screen ..that's why ι was suprised ..on му pc the fne's driver read TECNO d3 ..buh mtkdroid wasn't able тσ detect the device ..and ι couldn't check if usb debugging was on ..and moreover the fne didn't vibrate before coming ON

..So so. Confused on this type of miracle

what's the status of the phone @ the moment?
Reply
#39
(08-09-2014, 12:41 PM)hovatek Wrote: what's the status of the phone @ the moment?

Phone currently off ..not responding тσ power button and not been detected on pc ..both pc running win7 and win XP
Reply
#40
(08-09-2014, 02:18 PM)X3non Wrote: Phone currently off ..not responding тσ power button and not been detected on pc ..both pc running win7 and win XP

Try flashing without battery inside
Reply










Users browsing this thread:
1 Guest(s)