Hovatek Forum MOBILE Android HELP!!! tecno d5
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


HELP!!! tecno d5

HELP!!! tecno d5

Pages (5): Previous 1 2 3 4 5 Next
X3non
X3non
X3non
Recognized Contributor
22,062
01-08-2014, 07:38 PM
#11



(01-08-2014, 06:11 PM)hovatek you'll need to comment out those two

How am ι тσ do that? ..cos ι tried adding __NOdl_ in front of em ..then reselected the scatter file ..thus they didn't appear on the list this time ..that was the only way ι could use firmware upgrade ..buh it didn't work ..gave error about pmt that ι should use DOWNlOad instead
hovatek
hovatek
hovatek
Administrator
49,570
01-08-2014, 08:49 PM
#12
(01-08-2014, 07:38 PM)X3non How am ι тσ do that? ..cos ι tried adding __NOdl_ in front of em ..then reselected the scatter file ..thus they didn't appear on the list this time ..that was the only way ι could use firmware upgrade ..buh it didn't work ..gave error about pmt that ι should use DOWNlOad instead

Download and install Notepad++
Open the scatter file using Notepad++
Delete the following lines in the scatter file then save
}
SEC_RO 0xe80000
{

and

}
CACHE 0x12ba0000
{

Ensure to delete any blank row so there's no space. Now, try loading scatter file again

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
X3non
X3non
X3non
Recognized Contributor
22,062
01-08-2014, 10:45 PM
#13
Spf tool v3 ..give the error
(Warning hint) get BMT block count fail, default BMT block count is used!

Now if ι click ok тσ proceed тσ firmware upgrade

It now gives the error
SP FLASH TOOL ERROR : (8045)
No valid partition management table(PMT) ƒσʀ storage device!
(HINT):
Please make sure there is α correct load in the target.
Firmware upgrade could not вє executed without PMT!
Please "download" only first тσ create PMT on the target

Spf tool v5 on the other hand doesn't give any errors when ι select scatter file

Buh when ι click firmware upgrade ..it gives the error
_NODL_NVRAm: failed тσ get PMT info
This post was last modified: 01-08-2014, 10:49 PM by X3non.
hovatek
hovatek
hovatek
Administrator
49,570
01-08-2014, 11:01 PM
#14
(01-08-2014, 10:45 PM)X3non Spf tool v3 ..give the error
(Warning hint) get BMT block count fail, default BMT block count is used!

Now if ι click ok тσ proceed тσ firmware upgrade

It now gives the error
SP FLASH TOOL ERROR : (8045)
No valid partition management table(PMT) ƒσʀ storage device!
(HINT):
Please make sure there is α correct load in the target.
Firmware upgrade could not вє executed without PMT!
Please "download" only first тσ create PMT on the target

Spf tool v5 on the other hand doesn't give any errors when ι select scatter file

Buh when ι click firmware upgrade ..it gives the error
_NODL_NVRAm: failed тσ get PMT info

OK, replace the modified scatter file with the original, we're going to do another modding
This post was last modified: 01-08-2014, 11:18 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
hovatek
hovatek
hovatek
Administrator
49,570
02-08-2014, 06:59 AM
#15



list all the versions of SP flash tool you have

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
X3non
X3non
X3non
Recognized Contributor
22,062
02-08-2014, 08:33 AM
#16
V3.1316
V3.1324
V3.1328
V5.1352.01
hovatek
hovatek
hovatek
Administrator
49,570
02-08-2014, 07:52 PM
#17
(02-08-2014, 08:33 AM)X3non V3.1316
V3.1324
V3.1328
V5.1352.01

what's your email address? wanna send you modded secro and cache files

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
X3non
X3non
X3non
Recognized Contributor
22,062
02-08-2014, 09:48 PM
#18
obiomaojogho@gmail.com

obiomaojogho@gmail.com
Тнαηкѕ
This post was last modified: 02-08-2014, 10:06 PM by X3non.
hovatek
hovatek
hovatek
Administrator
49,570
03-08-2014, 08:19 AM
#19
(02-08-2014, 09:48 PM)X3non obiomaojogho@gmail.com
Тнαηкѕ

check your email

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
X3non
X3non
X3non
Recognized Contributor
22,062
03-08-2014, 09:56 AM
#20



Downloaded it ..and tried it with v5 and v1328 ..both gave me the same errors they have been giving me both with download and firmware upgrade
Pages (5): Previous 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram