HELP!!! tecno d5
HELP!!! tecno d5
(03-08-2014, 09:56 AM)X3non Downloaded it ..and tried it with v5 and v1328 ..both gave me the same errors they have been giving me both with download and firmware upgrade
(03-08-2014, 12:20 PM)dabossq Now if ι click firmware upgrade on v1328
It gives the error
SP FLASH TOOL ERROR : (8045)
No valid partition management table(PMT) ƒσʀ storage device!
(HINT):
Please make sure there is α correct load in the target.
Firmware upgrade could not вє executed without PMT!
Please "download" only first тσ create PMT on the target
Spf tool v5
when ι click firmware upgrade ..it gives the error
_NODL_NVRAm: failed тσ get PMT info
Buh if ι use download only it gives
BROM ERROR: S_DA_DRAM_NOT_SUPPORT (3004)
(H/W) the handset doesn't support DRAM. Pls ask ƒσʀ help
(03-08-2014, 06:01 PM)dabossq Spftool v1 ..error after selecting scatter file
Spf tool of this version only supports MT6516. Please select α scatter file ƒσʀ mt6516!
Spf tool v2 ..error after selecting scatter file
Error: initialize scatter file failed, please check the scatter file name you load is legal
Spf tool v5.14
successfully loaded the scatter file
Now download preloader.bin alone give the very same error
BROM ERROR: S_DA_DRAM_NOT_SUPPORT (3004) etc...
Му hopes of reviving this fne just reduced by 40percent :'(
(04-08-2014, 08:54 AM)dabossq Ok sir
(04-08-2014, 05:07 PM)dabossq Тнαηкѕ man ..buh would this work on windows?