Hi, Guest! Login / Register




Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] List of SP Flash Tool errors, their meanings and how to resolve them


(10-01-2014, 12:02 PM)immanuelsons Wrote: I have tried everything possible to flash my phone via sp flash tools.. I downloaded the stock rom for my tecno phantom A+ from this site.. But after flashing,  my phone went blank , it turned on but didn't show the boot logo at all. Just blurred screen.  What did I do wrong? I downloaded the stock mtk backup of my phone from your site.. Every file I used from this site.. Pls help

Is your phone Phantom A (F7) or Phantom A+


Reply
(10-02-2014, 06:20 AM)hkm1175 Wrote: hi,first thank u for your work in this site and sorry for my bad english,
still have a problem with my phone model:ICE-PHONE MINI with an MTK6572,so i've brick it after i  flash  a "wrong recovery"
and now i'm trying to unbrick using sp-flash tool 3.1332 but it failed with error(2004)" here is the log file if needed
so please help me if you can...thank you
https://drive.google.com/file/d/0B3e4gQ7...sp=sharing

What does the phone show when you try powering it up normally?

Note: To make this easier, you could create a new thread for this issue by clicking ---> http://forum.hovatek.com/newthread.php?fid=4
Reply
(10-02-2014, 10:51 AM)hovatek Wrote:
(10-02-2014, 06:20 AM)hkm1175 Wrote: hi,first thank u for your work in this site and sorry for my bad english,
still have a problem with my phone model:ICE-PHONE MINI with an MTK6572,so i've brick it after i  flash  a "wrong recovery"
and now i'm trying to unbrick using sp-flash tool 3.1332 but it failed with error(2004)" here is the log file if needed
so please help me if you can...thank you
https://drive.google.com/file/d/0B3e4gQ7...sp=sharing

What does the phone show when you try powering it up normally?

Note: To make this easier, you could create a new thread for this issue by clicking ---> http://forum.hovatek.com/newthread.php?fid=4
it starts on logo "ICE-PHONE" n apears connected in the device manager for 3 sec ,after that it disconnected from the device manager and show white screen,,,it repeat the same until i unpluged the usb cable it shut down....
Reply
(10-05-2014, 11:50 PM)hkm1175 Wrote: it starts on logo "ICE-PHONE" n apears connected in the device manager for 3 sec ,after that it disconnected from the device manager and show white screen,,,it repeat the same until i unpluged the usb cable it shut down....

create a
new thread for this issue by clicking --->
http://forum.hovatek.com/newthread.php?fid=4
Reply
8406 error

[size=14.3999996185303px]Model: WCDMA Malaysia.
[size=14.3999996185303px][size=14.3999996185303px]

Symptom: Hard brick (can't on at all).
[size=14.3999996185303px]Once plugged in with battery removed, pc detects 2 drivers to be installed. Single USB driver, and VCOM. Then it keeps looping in connecting and disconnecting between Single USB driver and VCOM driver. Non-stop. Frequency: every 3~5 seconds.

[size=14.3999996185303px]Trying to flash. Only managed to get DA 100% red bar. After that I received error code 8406 from SP Flash Tools because of the disconnecting sound.

[size=14.3999996185303px]I use another computer. When I plugged in fresh to the new computer, the computer immediately tries to install 2 drivers again. And it will keep looping (i can hear the USB connecting and disconnecting sound) all the way.

[size=14.3999996185303px]Some precaution I took:
1. USB Deview. I used this to remove all mtk related drivers and try again.
[size=14.3999996185303px]2. Bcoz I'm using Windows 8.1 64-bit, I did use restart option F7 to disable drivers signature prior to installing MTK Drivers.
[size=14.3999996185303px]I used All MTK USB Driver 2014.....DPInst64.exe....
[size=14.3999996185303px]3. I ran all using administrater permission.4. I used all possible usb ports in my computer but to no avail.

[size=14.3999996185303px]I'm crying now =(
Reply
(10-09-2014, 01:55 AM)alexkos Wrote: 8406 error

[size=14.3999996185303px]Model: WCDMA Malaysia.
[size=14.3999996185303px][size=14.3999996185303px]

Symptom: Hard brick (can't on at all).
[size=14.3999996185303px]Once plugged in with battery removed, pc detects 2 drivers to be installed. Single USB driver, and VCOM. Then it keeps looping in connecting and disconnecting between Single USB driver and VCOM driver. Non-stop. Frequency: every 3~5 seconds.

[size=14.3999996185303px]Trying to flash. Only managed to get DA 100% red bar. After that I received error code 8406 from SP Flash Tools because of the disconnecting sound.

[size=14.3999996185303px]I use another computer. When I plugged in fresh to the new computer, the computer immediately tries to install 2 drivers again. And it will keep looping (i can hear the USB connecting and disconnecting sound) all the way.

[size=14.3999996185303px]Some precaution I took:
1. USB Deview. I used this to remove all mtk related drivers and try again.
[size=14.3999996185303px]2. Bcoz I'm using Windows 8.1 64-bit, I did use restart option F7 to disable drivers signature prior to installing MTK Drivers.
[size=14.3999996185303px]I used All MTK USB Driver 2014.....DPInst64.exe....
[size=14.3999996185303px]3. I ran all using administrater permission.4. I used all possible usb ports in my computer but to no avail.

[size=14.3999996185303px]I'm crying now =(

create a new thread for this issue by clicking --->
http://forum.hovatek.com/newthread.php?fid=4
Reply
Pls i need help.
I installed Hfont on my tecno P5 n it got bricked (i.e booting n stopping at tecno logo). I tried flashing,clearing/wipe data&cache, factory reset; still stucked at boot logo. I gave it 4 repair, d repairer worked it but i still bricked it again with hfont. Gave it to him again to repair but this time the phone went totally dead. Av tried using sp flash tool to format n flash the files(preloader,msr,esr1,uboot,bootimg,logo et al), but it is showing me Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Am using d correct scatter file(P5) downloaded frm dis site, Preloader.bin,uboot.bin,bootimg,esr et al still 4 p5 frm dis site. Evn wen trying to format only, it will in 1 sec reach 100% with red and after 1.51 secs will show Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Pls help, am using sp flash tool 3.18..... .
Reply
(10-12-2014, 10:29 PM)giftium Wrote: Pls i need help.
I installed Hfont on my tecno P5 n it got bricked (i.e booting n stopping at tecno logo). I tried flashing,clearing/wipe data&cache, factory reset; still stucked at boot logo. I gave it 4 repair, d repairer worked it but i still bricked it again with hfont. Gave it to him again to repair but this time the phone went totally dead. Av tried using sp flash tool to format n flash the files(preloader,msr,esr1,uboot,bootimg,logo et al), but it is showing me Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Am using d correct scatter file(P5) downloaded frm dis site, Preloader.bin,uboot.bin,bootimg,esr et al still 4 p5 frm dis site. Evn wen trying to format only, it will in 1 sec reach 100% with red and after 1.51 secs will show Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Pls help, am using sp flash tool 3.18..... .

please create a new thread
Reply
i tried using this tool to flash a preloader to my r7 and i get an error telling me that the preloader is too large and may cause region overlap.

when i still go further to flash the preloader. it simply stays at 0% no progress whatsoever.
Reply
(10-18-2014, 08:08 PM)yuddie Wrote: i tried using this tool to flash a preloader to my r7 and i get an error telling me that the preloader is too large and may cause region overlap.

when i still go further to flash the preloader. it simply stays at 0% no progress whatsoever.

manually install vcom drivers using. http://forum.hovatek.com/thread-440.html
Reply










Users browsing this thread:
5 Guest(s)