Hi, Guest! Login / Register




Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] List of SP Flash Tool errors, their meanings and how to resolve them


I dont know, how to install vcom drivers on win10 >.<


Reply
(This post was last modified: 10-28-2015, 08:31 PM by X3non. )
(10-28-2015, 08:14 PM)vbence01 Wrote: I dont know, how to install vcom drivers on win10 >.<

its virtually the same process except that from win 8,8.1 and 10, you'd need to disable driver signature

follow the guide @ https://forum.hovatek.com/thread-440.html to install vcom drivers
and don't forget to disable driver signature using the guide @ http://forum.hovatek.com/thread-752.html
Reply
sir, how can fix this because my phone is not powering again after the formatting take place.
Reply
(11-09-2015, 02:51 PM)Ebismith Wrote: sir, how can fix this because my phone is not powering again after the formatting take place.

You need to flash back the ROM after formatting.
create a new thread so we focus on this

see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) - See more at: https://forum.hovatek.com/thread-439.htm...Sln54.dpuf

I did what you asked but still giving the same BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Reply
(11-29-2015, 05:22 PM)nash80 Wrote: Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) - See more at: https://forum.hovatek.com/thread-439.htm...Sln54.dpuf

I did what you asked but still giving the same BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Have you tried another PC and SP flash tool from  https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
(11-30-2015, 11:09 AM)hovatek Wrote:
(11-29-2015, 05:22 PM)nash80 Wrote: Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) - See more at: https://forum.hovatek.com/thread-439.htm...Sln54.dpuf

I did what you asked but still giving the same BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Have you tried another PC and SP flash tool from  https://forum.hovatek.com/thread-159.html

I tried an older version of sp tool and it worked.. Thanks anyway
Reply
how do i fix the phone showing invalid imei after flashing thanx
Reply
(12-09-2015, 12:56 AM)engr david Wrote: how do i fix the phone showing invalid imei after flashing thanx

https://forum.hovatek.com/thread-116.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
I need flash file for Tecno Y4
Reply










Users browsing this thread:
4 Guest(s)