Hi, Guest! Login / Register




Thread Rating:
  • 8 Vote(s) - 4.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to manually install MT65xx (MediaTek) USB VCOM drivers on Windows

#61

Is pdanet included in this process too?

Sent from my Z3 using Hovatek mobile


Reply
#62
(10-07-2015, 09:43 AM)Drockstar Wrote: Is pdanet included in this process too?

Sent from my Z3 using Hovatek mobile

no
Reply
#63
So what should I used to uninstall pdanet?

Sent from my Z3 using Hovatek mobile
Reply
#64
(10-08-2015, 02:12 AM)Drockstar Wrote: So what should I used to uninstall pdanet?

Sent from my Z3 using Hovatek mobile

PdaNet is not involved in this guide
Reply
#65
(09-10-2014, 09:26 PM)Slimzzy Wrote:
(08-03-2014, 01:13 PM)hovatek Wrote: 1. Download MediaTek USB VCOM drivers @ https://hovatek.com/redirect.php?link=ht...sp=sharing
1b. Extract the contents of the file above ( The Password when extracting is Hovatek )
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups you see there From Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek preloader usb vcom port)
10. Click Next and finish installing.

PHONE STILL NOT RECOGNISED AFTER PROCESS. . . .I THINK IT HAS SOMETHING TO DO WITH THE ERROR CODES IN [email protected] .


hi, i still cannot get to the driver download page following the updated download link mentioned above.. when i click on it, another tab opens up saying the URL is blocked... i dont even get to the entering the password page.. urgent help needed.. i cant boot my phone and i need to flash the stock ROM in my lenovo S920... followed the steps above to disable driver signature verification in Windows 10 Pro..
Reply
#66
(10-20-2015, 06:22 PM)watevausayiam Wrote: hi, i still cannot get to the driver download page following the updated download link mentioned above.. when i click on it, another tab opens up saying the URL is blocked... i dont even get to the entering the password page.. urgent help needed.. i cant boot my phone and i need to flash the stock ROM in my lenovo S920... followed the steps above to disable driver signature verification in Windows 10 Pro..

create a new thread so we focus on this
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply
#67
(This post was last modified: 10-25-2015, 04:57 PM by laykan007. )
AFter trying to install d mediatek preloader usb vcom port...... at d end wat i get is "An error occured during the installation of the device....the third party INF does not contain digital signature information
Reply
#68
(This post was last modified: 10-25-2015, 08:09 PM by X3non. )
(10-25-2015, 04:55 PM)laykan007 Wrote: AFter trying to install d mediatek preloader usb vcom port...... at d end wat i get is "An error occured during the installation of the device....the third party INF does not contain digital signature information

* You need to disable drivers signature verification. see http://forum.hovatek.com/thread-752.html
* or better still use a PC running on windows 7
Reply
#69
(10-25-2015, 08:07 PM)X3non Wrote:
(10-25-2015, 04:55 PM)laykan007 Wrote: AFter trying to install d mediatek preloader usb vcom port...... at d end wat i get is "An error occured during the installation of the device....the third party INF does not contain digital signature information

* You need to disable drivers signature verification. see  http://forum.hovatek.com/thread-752.html
* or better still use a PC running on windows 7

Thanks so much....did that on d instructions,now i have successfully rooted my tecno c8
Reply
#70
I followed all of the steps..but still cannot install the driver..I'm running windows 10..i also disalble the enforcement..what to do?????
Reply










Users browsing this thread:
3 Guest(s)